The Sodick AP650L is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AP650L wire EDM: 650 x 450 x 120 mm travels, 820 x 590 x 100 mm / 200 kg flushed workpiece, ±7° taper, 0.05-0.3 mm wire.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 6,300 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 650 mm |
| Y-Axis Travel | 450 mm |
| Z-Axis Travel | 120 mm |
| Uv Axis Travel | 35 × 35 mm |
| Max Taper Angle | ±7°(plate thickness:100mm) |
| Max Workpiece Size Flushing | 820 × 590 × 100 mm |
| Max Workpiece Weight Flushing | 200 kg |
| Wire Diameter | 0.05 - 0.3 mm |
| Wire Tension | 3 - 25 N |
| Max Wire Feed Rate | 250 mm/sec |
| Floor To Table | 1,100 mm |
| Footprint | 2,470 × 1,990 × 2,175 mm |
| Installation Footprint | 4,000 × 3,630 mm |
| Machine Weight | 6,300 kg |
| Power Supply | 3-phase 50/60Hz 13 kVA |
According to secondary market equipment benchmarks for November 2026, the Sodick AP650L is estimated between $46,500 and $95,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $721 / month.
With flushing, 820 × 590 × 100 mm and 200 kg. Sodick's table for this model does not give submerged figures, so ask for them if you plan to cut with the tank filled. X/Y/Z travel is 650 × 450 × 120 mm.
For plan area on thin parts. The AP650L has 650 mm of X and 450 mm of Y but 120 mm of Z. The ALN600Q has 600 mm of X, 400 mm of Y and 350 mm of Z and weighs 4,200 kg against 6,300 kg for the AP650L. Parts thicker than 100 mm do not fit the AP650L at all.
Both have 120 mm of Z. The AP350L has 350 mm of X and 350 mm of Y and weighs 4,650 kg; the AP650L extends this to 650 × 450 mm at 6,300 kg. Pick the AP650L when parts or nests of parts exceed the smaller machine's square envelope.
Up to ±7° at a plate thickness of 100 mm, with 35 × 35 mm of U/V travel. The angle is given at that thickness only; parts that need steep relief angles belong on a machine with more U/V travel.
According to secondary market equipment benchmarks for November 2026, the Sodick AP650L is estimated between $46,500 and $95,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $721 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.