The Sodick AQ35L is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LN (Linear iQ) control. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AQ35L wire EDM (older model): 350 x 250 x 220 mm travels, 450 x 320 mm table, 300 kg workpiece, 185 mm max height, 2,800 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LN (Linear iQ) control |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 450 x 320 mm |
| Approx. Machine Weight | 2,800 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 450 x 320 mm |
| X-Axis Travel | 350 mm |
| Y-Axis Travel | 250 mm |
| Z-Axis Travel | 220 mm |
| Max Workpiece Weight | 300 kg |
| Max Workpiece Height | 185 mm |
| Generator Power | Digital solid-state transistor generator, 8A peak |
| Surface Finish | Ra 0.2 µm (precision finish capable) |
| CNC Control | Sodick LN (Linear iQ) control |
| Machine Weight | 2,800 kg |
According to secondary market equipment benchmarks for November 2026, the Sodick AQ35L is estimated between $50,500 and $101,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $783 / month.
No. It does not appear in Sodick's current lineup and is probably an older model. Expect to find it second-hand, and confirm with Sodick what support remains for its LN (Linear iQ) control and generator.
The listed maximum workpiece height is 185 mm, even though Z travel is 220 mm. Workpiece weight is limited to 300 kg and the table is 450 x 320 mm.
The listed table names a digital solid-state transistor generator with 8 A peak current and the Sodick LN (Linear iQ) control, with an achievable surface finish of Ra 0.2 µm. Ask the seller to demonstrate both under cut before buying.
Wire diameter range, taper angle, U/V travel, work tank size, floor dimensions and power supply are not listed. Get them from Sodick or from the machine's own documentation before planning work or installation.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.