The Sodick AX350L is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AX350L fine-wire EDM: 350 x 350 mm X/Y travel, Ø0.05-Ø0.25 mm wire, 540 x 500 x 100 mm workpiece, ±15° taper, 4,950 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 10,913 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Size | 21.26 in × 19.69 in × 3.94 in (540 × 500 × 100 mm) |
| Max Workpiece Weight | 661 lb (300 kg) |
| X-Axis Travel | 13.78 in (350 mm) |
| Y-Axis Travel | 13.78 in (350 mm) |
| Z-Axis Travel | 4.72 in (+3.94 in)* (120mm +100mm) |
| Uv Axis Travel | 3.15 in × 3.15 in (80 × 80 mm) |
| Max Taper Angle | ±15° (at 3.94 in / 100mm thickness) |
| Wire Diameter | Ø0.002 in - Ø0.010 in (Ø0.05 - Ø0.25 mm) |
| Wire Feed Rate | 590 in/min (250 mm/sec) |
| Wire Tension | 3 - 25 N |
| Floor To Table | 37.40 in (950 mm) |
| Footprint | 62.99 in × 98.62 in × 86.02 in (1,600 × 2,505 × 2,185 mm); Body height: 84.45 in (2,145mm) |
| Machine Weight | 10,913 lb (4,950 kg) |
| Air Pressure | 0.5 MPa, 30 NL/min |
According to secondary market equipment benchmarks for November 2026, the Sodick AX350L is estimated between $50,500 and $101,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $783 / month.
Wire from Ø0.002 in to Ø0.010 in (Ø0.05 - Ø0.25 mm). Wire tension is adjustable from 3 to 25 N and the wire feed runs at up to 590 in/min (250 mm/sec). The fine end of that range is the reason to choose this machine for small corner radii and narrow slots.
Up to 21.26 in × 19.69 in × 3.94 in (540 × 500 × 100 mm) and 661 lb (300 kg). The part can overhang the 13.78 in × 13.78 in (350 × 350 mm) X/Y stroke, but only the area within that stroke can be cut, and the 3.94 in (100 mm) height limit rules out thick blocks.
According to secondary market equipment benchmarks for November 2026, the Sodick AX350L is estimated between $50,500 and $101,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $783 / month.
Floor space of 62.99 in × 98.62 in × 86.02 in (1,600 × 2,505 × 2,185 mm), a floor for 10,913 lb (4,950 kg), and compressed air at 0.5 MPa, 30 NL/min. The table sits 37.40 in (950 mm) above the floor.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.