The Sodick K3L-C is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LQ controller with NC orbiting. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick K3L-C linear-motor sinker EDM: 350 x 250 x 250 mm travels, 500 x 350 mm table, 300 kg workpiece, 30 kg electrode. Older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LQ controller with NC orbiting |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 350 mm (13.8 in) |
| Y-Axis Travel | 250 mm (9.84 in) |
| Z-Axis Travel | 250 mm (9.84 in) |
| Work Table Size | 500 x 350 mm (19.7 x 13.8 in) |
| Max Workpiece Weight | 300 kg (661 lb) |
| Max Electrode Weight | 30 kg (66 lb) |
| Drive System | Linear motors (X, Y, Z axes) |
| Generator | Sodick LN1W adaptive discharge generator |
| Surface Finish | VDI 0 (mirror) achievable on final finish passes |
| Positioning Resolution | 0.1 µm |
| Positioning Accuracy | ±0.001 mm |
| Dielectric | Hydrocarbon oil (Sodick EDM fluid) |
| CNC Control | Sodick LQ controller with NC orbiting |
| Orbital Motion | 3D orbital, circular, helical, and user-defined |
| Machine Weight | approx. 2,200 kg (4,850 lb) |
According to secondary market equipment benchmarks for November 2026, the Sodick K3L-C is estimated between $46,500 and $95,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $721 / month.
No. The K3L-C is not in Sodick's current lineup and may be an older model. Its table could not be checked against Sodick's documents, so confirm the travels, the controller fitted and the generator on the machine itself before buying.
The listed table gives a Sodick LQ controller with NC orbiting in 3D orbital, circular, helical and user-defined patterns. On a used machine, check that the orbit functions are enabled in the control and run a test cavity before relying on them.
The table is 500 x 350 mm (19.7 x 13.8 in), the workpiece limit is 300 kg (661 lb) and the electrode can weigh up to 30 kg (66 lb). The electrode reaches 350 x 250 mm (13.8 x 9.84 in) of the part, with 250 mm (9.84 in) of Z for electrode length and part height combined.
That is the listed positioning accuracy, alongside 0.1 µm resolution. Neither has been checked against Sodick's documents, and figures this tight depend on temperature control and machine condition. Ask for a measured positioning test on the machine you are buying.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.