The Sodick AG600L is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LN2W CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG600L wire EDM, an older model: 600 x 400 mm X/Y, listed 800 kg and 1050 x 820 x 370 mm part capacity, ±30° taper, 0.1-0.3 mm wire.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LN2W CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,800 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Y Travel | 600 x 400 mm (23.6 x 15.7 in) |
| Z Travel U Axis Stroke | 370 mm (14.6 in) |
| U V Travel | ±80 mm (±3.1 in) |
| Max Workpiece Dimensions | 1050 x 820 x 370 mm |
| Max Workpiece Weight | 800 kg (1,764 lb) |
| Wire Diameter Range | 0.1 – 0.3 mm (brass or coated wire) |
| Max Cutting Speed | 450 mm²/min (in 50 mm steel with 0.25 mm wire) |
| Surface Finish | Ra 0.1 µm (final skim passes on steel) |
| Max Taper Angle | ±30° over 100 mm height |
| Drive System | All-axis linear motor (no ballscrews) |
| Generator | Sodick SP digital generator with K-SMC adaptive control |
| Auto Wire Threading | Yes — water-jet assist, auto re-thread at breaks |
| CNC Control | Sodick LN2W CNC |
| Power Supply | 200V, 3-phase, 50/60 Hz |
| X Y Z Travel | 600 x 400 x 300 mm |
| Surface Finish Ra | Ra 0.1 µm |
| Taper Angle | ±30° / 100 mm |
| Control System | Sodick LN (Windows-based) |
| Machine Weight | ~5,800 kg |
Our best estimate for the Sodick AG600L is $220,000 – $380,000. This is an estimate for a wire edm in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-ag600l-wire-edm#price; the request is passed to Sodick or an authorised dealer.
It is not in Sodick's current lineup and is most likely an older model. A buyer will be looking at a used machine, so check its condition and measure its travels rather than relying on a spec sheet.
X/Y is listed as 600 x 400 mm (23.6 x 15.7 in), with ±80 mm (±3.1 in) of U/V. Z is listed as 370 mm (14.6 in) in one row and 300 mm in another, so confirm it on the machine.
The listed figures give 800 kg (1,764 lb) and a maximum part size of 1050 x 820 x 370 mm. The machine itself is listed at ~5,800 kg, so plan the floor for both.
The ALC600G covers the same X/Y class with 23.62 in (600 mm), 15.75 in (400 mm) and 13.78 in (350 mm) of travel and weighs 10,141 lb (4,600 kg).