The Sodick AL800P is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AL800P wire EDM: 800 x 600 mm X/Y with 250 mm Z, plates to 1250 x 1020 x 240 mm and 1500 kg, ±25° taper at 130 mm, 13 kVA.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 12,676 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 31.50 in (800 mm) |
| Y-Axis Travel | 23.62 in (600 mm) |
| Z-Axis Travel | 9.84 in (250 mm) |
| Work Tank Size | 55.51 in × 43.70 in (1410 × 1110 mm) |
| Uv Axis Travel | 5.91 in × 5.91 in (150 × 150 mm) |
| Max Taper Angle | ± 25° plate thickness: 5.12 in (130 mm) |
| Max Workpiece Size | 49.21 in × 40.16 in × 9.45 in (1250 × 1020 × 240 mm) |
| Max Workpiece Weight | 3,307 lb (1500 kg) |
| Wire Diameter | .002 in - .012 in (0.05 - 0.30 mm) |
| Wire Tension | 3 - 23 N |
| Wire Feed Rate | 16.54 in/sec (420 mm/sec) |
| Floor To Table | 39.17 in (995 mm) |
| Footprint | 129.92 in × 143.70 in × 95.08 in (3300 × 3650 × 2415 mm) |
| Machine Weight | 12,676 lb (5750 kg) |
| Power Supply | 3-phase, 50/60 Hz, 13 kVA |
Our best estimate for the Sodick AL800P is $200,000 - $290,000. This is an estimate for a wire edm in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-sodick-al800p#price; the request is passed to Sodick or an authorised dealer.
The table lists 9.84 in (250 mm) of Z and a maximum workpiece height of 9.45 in (240 mm). The machine is sized for wide, relatively thin plates. For thicker work at the same 800 × 600 mm area, the AL800G lists 500 mm of Z.
49.21 in × 40.16 in × 9.45 in (1250 × 1020 × 240 mm), up to 3,307 lb (1500 kg), in a 55.51 in × 43.70 in (1410 × 1110 mm) tank. The cut path must fall inside the 800 × 600 mm of X/Y travel.
Both move 31.50 in (800 mm) in X and 23.62 in (600 mm) in Y. The ALN800G lists 19.69 in (500 mm) of Z against 9.84 in (250 mm) on the AL800P, and weighs 12,125 lb (5,550 kg) against 12,676 lb (5750 kg).
The machine measures 129.92 in × 143.70 in × 95.08 in (3300 × 3650 × 2415 mm) and weighs 12,676 lb (5750 kg). It needs a 3-phase, 50/60 Hz supply of 13 kVA. The table top is 39.17 in (995 mm) above the floor.
