The Sodick AQ750L is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LQ controller. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AQ750L wire EDM: 29.53 x 19.68 x 23.62 in (750 x 500 x 600 mm) travels, 300 mm max workpiece height, 1,500 kg load, ±15° taper.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LQ controller |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 11,684 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 29.53 in (750 mm) |
| Y-Axis Travel | 19.68 in (500 mm) |
| Z-Axis Travel | 23.62 in (600 mm) |
| Uv Taper Range | ±15° / 100 mm height |
| Work Table Size | 1,000 x 720 mm (39.4 x 28.3 in) |
| Max Workpiece Weight | 3,307 lb (1,500 kg) |
| Max Workpiece Height | 300 mm (11.8 in) |
| Drive System | Linear motors (X, Y, U, V axes) |
| Generator | SP43A with e-pak discharge circuit |
| Surface Finish | Ra 0.20 um achievable |
| Positioning Accuracy | ±0.001 mm |
| CNC Control | Sodick LQ controller |
| Awt | Automatic wire threading with in-cut re-threading |
| Machine Weight | 11,684 lb (5,300 kg) |
| Machine Structure | Cast iron and granite composite bed |
| Uv Axis Travel | 30.31 in × 20.47 in (770 × 520 mm) |
| Wire Diameter | 0.006 in - 0.012 in (0.15 - 0.30 mm) |
| Work Tank Size | 49.76 in × 38.31 in (1,264 × 973 mm) |
| Floor To Table | 39.37 in (1,000 mm) |
| Footprint | 82.68 in × 110.24 in × 92.52 in (2,100 × 2,800 × 2,350 mm) |
Our best estimate for the Sodick AQ750L is $240,000 - $320,000. This is an estimate for a wire edm in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-aq750l#price; the request is passed to Sodick or an authorised dealer.
The listed maximum workpiece height is 300 mm (11.8 in). Z travel is listed at 23.62 in (600 mm), but the workpiece height is the figure to plan around. Confirm both with Sodick if your parts are close to 300 mm.
In the listed figures, the workpiece height: 300 mm (11.8 in) on the AQ750L and 400 mm (15.7 in) on the AQ750LH. Travels, table size, workpiece weight, wire range and machine weight are listed the same for both.
The listed taper range is ±15° over a 100 mm height, with U/V travel given as 30.31 in × 20.47 in (770 × 520 mm). Because that U/V figure exceeds the X/Y travel, ask Sodick what it describes and what angle is possible on thicker plate.
The listed dimensions are 82.68 in × 110.24 in × 92.52 in (2,100 × 2,800 × 2,350 mm) and the weight 11,684 lb (5,300 kg), with the table 39.37 in (1,000 mm) above the floor. No electrical rating is listed, so get the supply requirement from Sodick.
