The Sodick AZ275Nano is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AZ275Nano high-speed machining centre: 300 x 250 x 100 mm travels, 20,000-120,000 rpm spindle, 5,000 mm/min feed, 5,500 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 300 mm |
| Y-Axis Travel | 250 mm |
| Z-Axis Travel | 100 mm |
| Max Cutting Feed | 5,000 mm/min |
| Acceleration | 2 × 1.5 × 2G (max. 0.5 G during machining) |
| Spindle Speed Range | 20,000 - 120,000 rpm |
| Machine Weight | 5,500 kg |
| Power Supply | 25 kVA |
| Footprint | 1,350 × 2,030 × 2,050 mm |
Our best estimate for the Sodick AZ275Nano is $200,000 - $350,000. This is an estimate for a sinker edm (ram edm) in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-sodick-az275nano#price; the request is passed to Sodick or an authorised dealer.
No. Its table describes a machining centre: a spindle running from 20,000 to 120,000 rpm, a maximum cutting feed of 5,000 mm/min, and 300 × 250 × 100 mm of travel. Sodick lists it with its machining products rather than its EDMs.
Small ones. The 20,000 - 120,000 rpm range is for small-diameter end mills and drills that need high rpm to reach a useful cutting speed. Larger tools that need low rpm and high torque are outside what this spindle range is built for.
A 25 kVA power supply and floor space of 1,350 × 2,030 × 2,050 mm for a 5,500 kg machine. The weight is concentrated on a small footprint, so check the floor loading where it will stand.
