The Star Micronics eCA-S32T is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Star Micronics eCA-S32T: 32 mm (1-1/4 in) bar, two turrets of 10 stations, up to 2 tools per station on 16 mm shanks, 32 mm sub spindle chucking.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Star Micronics (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Machining Diameter | 32 mm (1-1/4 in) |
| Max Chucking Diameter Sub | 32 mm (1-1/4 in) |
| First Turret | 10 stations (max 2 tools per station, 16 mm shank) |
| Second Turret | 10 stations (max 2 tools per station, 16 mm shank) |
| Max Turning Diameter | Ø32mm (1-1/4in) |
| Turret Stations | 10 stations (first turret), 10 stations (second turret) |
| Cnc Control | Motion Control System |
According to secondary market equipment benchmarks for November 2026, the Star Micronics eCA-S32T is estimated between $41,500 and $82,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $643 / month.
The first turret has 10 stations and the second turret has 10 stations. Each station takes a maximum of 2 tools on a 16 mm shank. How many stations can actually be doubled depends on the part and on clearance between neighbouring tools, so plan from the station count and treat the second tool per station as an upper limit.
The maximum chucking diameter of the sub spindle is 32 mm (1-1/4 in), the same as the maximum machining diameter. A part turned at full bar size can therefore be picked off and machined on its back end without being stepped down first.
Star's table lists it as a Motion Control System and says nothing more about it. Programming format, screen and options are not given, so anyone who needs to match the control to existing programs or operator training should ask Star for the control specification.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.