The Star Micronics SB-20RII is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc 0i-TF Plus. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Star Micronics SB-20RII: 7-axis Swiss-type lathe, 20 mm (25/32 in) bar or optional 25.4 mm (1 in), 10,000 RPM spindles, Fanuc 0i-TF Plus control.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Star Micronics (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc 0i-TF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 2.2 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Machining Diameter | 20 mm (25/32 in), optional 25.4 mm (1 in) |
| Max Headstock Stroke Guide Bush | 205 mm (8 in) |
| Max Headstock Stroke Non Guide Bush | Bar diameter x 2.5 (max 50 mm) |
| Main Spindle Speed | 10,000 RPM (8,000 RPM with 25.4mm option) |
| Main Spindle Power | 2.2 kW continuous / 3.7 kW (10 min, 25% ED) |
| Sub Spindle Speed | 10,000 RPM (8,000 RPM with 25.4mm option) |
| Sub Spindle Power | 1.5 kW continuous / 2.2 kW (15 min, 60% ED) |
| Number Of Axes | 7 |
| Turning Tools | 6 tools (12 mm) or 5 tools (16 mm) |
| Sub Spindle Stations | 4 standard, expandable to 6 |
| Rapid Feed Rate | 35 m/min |
| CNC Control | Fanuc 0i-TF Plus |
| Coolant Tank | 180 L |
| Machine Weight | Approx. 2,000kg |
| Dimensions | 2,070 x 1,095 x 1,775 mm |
| Max Turning Diameter | ø20mm (25/32in) OP: ø25.4mm (1in) |
| Turret Stations | 6 tools (ø12mm) / 5 tools (ø16mm) |
| Max Spindle Speed | Max. 10,000min-1 (OP: Max. 8,000min-1) |
| Spindle Motor Power | 2.2kW (cont)/3.7kW (10min/25%ED) |
| Rapid Traverse X | 35m/min (X1m Y1, Z1, X2, Z2) |
| Coolant Capacity | 180ℓ |
| Cnc Control | Fanuc 0i-TF Plus |
| Floor Space | 2,070 × 1,095× 1,775mm |
According to secondary market equipment benchmarks for November 2026, the Star Micronics SB-20RII is estimated between $36,500 and $75,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $566 / month.
Maximum machining diameter goes from 20 mm (25/32 in) to 25.4 mm (1 in). Maximum speed of both the main and the sub spindle goes from 10,000 RPM to 8,000 RPM. Star's table gives one set of power figures, 2.2 kW continuous / 3.7 kW (10 min, 25% ED) on the main spindle, with no separate rating for the option.
Star lists 7 axes. The turning post takes 6 tools with 12 mm shanks or 5 tools with 16 mm shanks. Sub spindle tooling is 4 stations as standard, expandable to 6.
With the guide bush the maximum headstock stroke is 205 mm (8 in). Without the guide bush it is bar diameter x 2.5, to a maximum of 50 mm. The machine can therefore be set up either for long, slender parts or for short parts that do not need guide-bush support.
Both are ø20mm (25/32in) machines with 35 m/min rapid traverse. The SB-20RII runs a Fanuc 0i-TF Plus control, weighs approximately 2,000kg and takes 6 tools (12 mm) or 5 tools (16 mm), with ø25.4mm (1in) bar as an option. The SB-20R Type G is listed with a Fanuc 31i-B control, a weight of 1,700 kg and 6 tools (ø12mm) / 7 tools (ø10mm).
The machine weighs approximately 2,000kg and its dimensions are 2,070 x 1,095 x 1,775 mm. The coolant tank holds 180 L. Star's table for this model gives no electrical supply or air figures, so request those with the installation drawing.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.