The Star Micronics SB-32 Multi-Spindle Automatic is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Star Micronics SB-32 Multi-Spindle Automatic: listed with 6 spindles, 32 mm bar capacity, 6,500 rpm, 22 kW total installed and approx. 14,500 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Star Micronics (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,500 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 14,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Number Of Spindles | 6 |
| Max Bar Diameter | 32 mm |
| Max Spindle Speed | 6,500 rpm |
| Spindle Motor Power | 22 kW (total installed) |
| Bar Feed Capacity | Front-loaded magazine bar feeder compatible |
| Cross Slides | 6 cross slides (one per position) + end-working unit |
| Control System | FANUC CNC (Star Micronics multi-spindle configuration) |
| Machine Weight | Approx. 14,500 kg |
According to secondary market equipment benchmarks for November 2026, the Star Micronics SB-32 Multi-Spindle Automatic is estimated between $50,000 and $88,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
The listed maximum bar diameter is 32 mm, with a maximum spindle speed of 6,500 rpm. The table gives no minimum diameter and no part length. All of the figures are listed ones that have not been confirmed against a Star page.
According to secondary market equipment benchmarks for November 2026, the Star Micronics SB-32 Multi-Spindle Automatic is estimated between $50,000 and $88,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
The table lists 6 cross slides, one per position, plus an end-working unit. It gives no tool count per slide and no stroke figures, so the detail of what each position can carry has to come from the documentation of the machine being considered.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.