The Star Micronics SB-16 is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc 31i-B. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Star SB-16: listed 16 mm (0.63 in) Swiss-type lathe, 10,000 RPM main spindle, 150 mm (5.9 in) machining length, 16 tool positions, 1,500 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Star Micronics (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc 31i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 1,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 16 mm (0.63 in) |
| Max Machining Diameter | 16 mm (0.63 in) |
| Max Machining Length | 150 mm (5.9 in) |
| Main Spindle Speed | 10,000 RPM |
| Back Spindle Speed | 8,000 RPM |
| Number Of Axes | 5 |
| Tool Positions | 16 |
| Guide Bushing | Yes (standard) |
| CNC Control | Fanuc 31i-B |
| Rapid Traverse | 30 m/min |
| Machine Weight | 1,500 kg (3,307 lb) |
| Power Consumption | 7 kVA |
According to secondary market equipment benchmarks for November 2026, the Star Micronics SB-16 is estimated between $38,000 and $77,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $589 / month.
The listed maximum bar capacity and machining diameter are 16 mm (0.63 in), and the maximum machining length is 150 mm (5.9 in). A guide bushing is listed as standard, which is what supports a part of that length at that diameter.
The main spindle is listed at 10,000 RPM and the back spindle at 8,000 RPM. No spindle power is listed for either. Rapid traverse is 30 m/min.
The listed machine weight is 1,500 kg (3,307 lb) and power consumption is 7 kVA. Both are listed figures, so check them against the nameplate before sizing the supply. The table gives no footprint, air or coolant figures.
Both are 16 mm machines. The SB-16 is listed with 30 m/min rapid traverse, a weight of 1,500 kg (3,307 lb) and a Fanuc 31i-B control. The SB-16R Type G is listed with 35 m/min on X1, Y1, Z1, X2 and Z2, a weight of 1,700 kg and a Fanuc 0i-TD control. The SB-16 figures are unconfirmed, so treat the comparison with care.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.