The Star Micronics SD-32 Type S is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc 31i-B5. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Star SD-32 Type S Swiss-type lathe: 32 mm (1.260 in) bar, 240 mm machining length, 9,000 RPM main spindle, 7 axes with ±10 mm Y stroke.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Star Micronics (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc 31i-B5 |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2,400 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 32 mm (1.260 in) |
| Max Machining Diameter | 32 mm (1.260 in) |
| Max Machining Length | 240 mm (9.45 in) |
| Main Spindle Speed | 9,000 RPM |
| Back Spindle Speed | 7,000 RPM |
| Live Tool Speed | 7,000 RPM |
| Number Of Axes | 7 (X1, Z1, X2, Z2, Y1, C1, C2) |
| Tool Positions | 22 (including live tools) |
| Y Axis Stroke | ±10 mm |
| Guide Bushing | Yes |
| CNC Control | Fanuc 31i-B5 |
| Rapid Traverse | 28 m/min |
| Machine Weight | 2,400 kg (5,291 lb) |
| Power Consumption | 12 kVA |
According to secondary market equipment benchmarks for November 2026, the Star Micronics SD-32 Type S is estimated between $39,000 and $78,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $605 / month.
The listed figures give a maximum bar capacity and machining diameter of 32 mm (1.260 in) and a maximum machining length of 240 mm (9.45 in), with a guide bushing. Check the collets and guide bushings supplied with a particular machine, since they set what can be run on day one.
Yes, one. The axis list is X1, Z1, X2, Z2, Y1, C1 and C2, and the Y-axis stroke is ±10 mm. That covers off-centre drilling and milling near the centreline on the main side. There is no Y2 in the list, so the back-working side relies on C2 for positioning.
The main spindle is listed at 9,000 RPM. The back spindle and the live tools are both listed at 7,000 RPM. No power or torque figure is given for any of them, so ask for the motor ratings from the machine's manual before planning heavy cuts.
The NEW SD-26 Type S is listed with a φ26mm (1-1/64 inch) bar, 260mm (10-15/64 inch) of turning length, a 10,000 rpm spindle and 36 m/min rapid traverse. The SD-32 Type S takes 32 mm (1.260 in) bar with 240 mm (9.45 in) of length, 9,000 RPM and 28 m/min. The larger bar size is the reason to choose it.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.