The Star Micronics SV-12 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Star SV-12 Swiss-type lathe: 12 mm (0.47 in) bar capacity and machining diameter, ±12 mm Y-axis stroke, 32 m/min rapid traverse.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Star Micronics (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 12 mm (0.47 in) |
| Max Machining Diameter | 12 mm (0.47 in) |
| Y Axis Stroke | ±12 mm |
| Rapid Traverse | 32 m/min |
According to secondary market equipment benchmarks for November 2026, the Star Micronics SV-12 is estimated between $45,000 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $698 / month.
12 mm (0.47 in). Maximum machining diameter is the same figure. For larger stock the SV-20 is listed with a ø20mm (25/32in) maximum turning diameter.
Yes. Star lists a Y-axis stroke of ±12 mm. On a 12 mm (0.47 in) bar that covers the whole cross-section with travel to spare, so off-centre features are limited by tooling and not by axis travel.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.