The Star Micronics SV-32 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Star SV-32 Swiss-type lathe: 32 mm (1.26 in) bar capacity, up to 10 axes including Y1, Y2, B-axis, C1 and C2, 32 m/min rapid traverse.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Star Micronics (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 32 mm (1.26 in) |
| Max Machining Diameter | 32 mm (1.26 in) |
| Number Of Axes | Up to 10 (including Y1, Y2, B-axis, C1, C2) |
| Rapid Traverse | 32 m/min |
According to secondary market equipment benchmarks for November 2026, the Star Micronics SV-32 is estimated between $38,000 and $77,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $589 / month.
Up to 10. The table names Y1, Y2, a B-axis, C1 and C2 among them. The wording is an upper limit, so ask which axes are fitted to the machine being quoted.
Maximum bar capacity and maximum machining diameter are both 32 mm (1.26 in). The table does not list an oversize option or a maximum machining length for this model.
Rapid traverse is listed at 32 m/min. The table gives a single figure and does not break it down by axis, so check whether Y2 and the B-axis move at the same rate if cycle time on short parts matters.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.