The Star Micronics SW-20 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Star Micronics SW-20 Swiss-type lathe: Ø20 mm (25/32 in) bar, 205 mm (8 in) headstock stroke, 10,000 rpm main and sub spindles, 3,400 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Star Micronics (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 2.2 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 4 Tool Stations |
| Approx. Machine Weight | 3,400 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Machining Diameter | 20 mm (25/32 in) |
| Max Headstock Stroke Standard | 205 mm (8 in) |
| Max Headstock Stroke Rmgb | 175 mm (6-57/64 in) |
| Sub Spindle Speed | 10,000 rpm |
| Sub Spindle Power | 2.2 kW (continuous) / 3.7 kW (10min/25%ED) |
| Front Turning Tools | 4 tools + power-driven tool |
| Rear Turning Tools | 2 tools + 4-spindle sleeve holder + power-driven tool |
| Sleeve Holder | 4-spindle (front 4 / rear 4 tools) |
| Back 8 Spindle Unit | Max 8 stationary + 6 power-driven tools |
| Machine Weight | 3,400 kg |
| Max Turning Diameter | Ø 20mm (25/32in) |
| Max Turning Length | 205mm (8 in.) standard / 175mm (6-57/64in) with R.M.G.B |
| Max Spindle Speed | 10,000 rpm |
| Spindle Motor Power | 2.2 kW (continuous) / 3.7 kW (10min/25%ED) |
| Tool Capacity | Front 4 tools / Rear 2 tools |
| Headstock Stroke | 205 mm (8 in) |
| Turning Tools | Front 4 tools, Rear 2 tools |
| Rapid Traverse | 35m/rpm (X2, Z1, Z2, Y1, Y3), 20m/rpm (X1, Y2, X3, Z3) |
| Bar Capacity | Ø20 mm (25/32 in) |
| Footprint | 2,588 × 1,300 × 1,765 mm |
According to secondary market equipment benchmarks for November 2026, the Star Micronics SW-20 is estimated between $39,000 and $78,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $605 / month.
It depends on the guide bushing arrangement. The maximum headstock stroke is 205 mm (8 in) as standard and 175 mm (6-57/64 in) with R.M.G.B. Maximum machining diameter is 20 mm (25/32 in) in both cases.
Front: 4 turning tools plus a power-driven tool. Rear: 2 tools, a 4-spindle sleeve holder and a power-driven tool. The sleeve holder carries 4 front and 4 rear tools. The back 8-spindle unit, which serves the sub spindle, takes a maximum of 8 stationary tools and 6 power-driven tools.
Yes, on the listed figures. Both run to 10,000 rpm and both are rated 2.2 kW (continuous) / 3.7 kW (10min/25%ED), so an operation can be moved from one end of the part to the other without losing speed or power.
Bar size, speed and mass. The SW-12RII is the smaller machine, with Ø13 mm (33/64 in) bar capacity, 15,000 rpm and a weight of 2,100 kg. The SW-20 takes Ø20 mm (25/32 in) bar, runs to 10,000 rpm and weighs 3,400 kg. Main spindle power is the same on both, 2.2 kW (continuous) / 3.7 kW (10min/25%ED).
According to secondary market equipment benchmarks for November 2026, the Star Micronics SW-20 is estimated between $39,000 and $78,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $605 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.