The Star Micronics SX-38 Type A/B is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 7,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Star Micronics SX-38 Type A/B: 12-axis Swiss-type lathe for Ø38 mm (1-1/2 in) bar with B-axis unit, 10-station turret and 7,000 rpm spindles.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Star Micronics (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 7,000 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Machining Diameter | 38 mm (1-1/2 in) |
| Max Headstock Stroke Standard | 320 mm (13-19/32 in) |
| Max Headstock Stroke Rgb | 289 mm (11-3/8 in) |
| Max Front Ejection Length | 150 mm (5-7/8 in) |
| Number Of Axes | 12 |
| Sub Spindle Speed | 7,000 rpm |
| Sub Spindle Power | 7.5 kW (continuous) / 11 kW (10min./25%ED) |
| Gang Type Tools | 4 tools + B-axis unit (front 4 + rear 4) |
| Turret | 10 stations (max 2 tools per station) |
| Back Unit | 8-spindle (max 8 tools) |
| Max Turning Diameter | Ø38mm (1-1/2in) |
| Max Headstock Stroke | 320mm (13-19/32in) |
| Max Headstock Stroke With Rg B Unit | 289mm (11-3/8in) |
| Max Spindle Speed | 7,000 rpm |
| Spindle Motor Power | 7.5 kW (continuous) / 11 kW (10min./25%ED) |
| Turret Stations | 10 stations |
| Rapid Traverse | 30 m/min (X1, X2, X3, Y1, Z1, Z2, Z3), 24 m/min (Y2), 15 m/min (Y3) |
| Headstock Stroke | 320 mm (13-19/32 in) |
| Bar Capacity | Ø38 mm (1-1/2 in) |
| Footprint | 2,955 × 1,430 × 1,975 mm |
According to secondary market equipment benchmarks for November 2026, the Star Micronics SX-38 Type A/B is estimated between $39,000 and $78,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $605 / month.
Three groups. The gang post has 4 tools plus a B-axis unit with 4 front and 4 rear tools. The turret has 10 stations and takes a maximum of 2 tools per station. The back unit is an 8-spindle type holding a maximum of 8 tools for the sub spindle.
The maximum headstock stroke is 320 mm (13-19/32 in) as standard and 289 mm (11-3/8 in) with the RGB unit, on a maximum machining diameter of 38 mm (1-1/2 in). The maximum front ejection length is 150 mm (5-7/8 in), so check how parts longer than that are unloaded.
Main and sub spindles carry the same listed figures: 7,000 rpm and 7.5 kW (continuous) / 11 kW (10min./25%ED). The 11 kW figure is a short-time rating, so size sustained roughing cuts on the 7.5 kW continuous figure.
All three take Ø38 mm (1-1/2 in) bar at 7,000 rpm. The SR-38 is listed with 5 tools on the front and 2 tools on the rear and weighs 4,300 kg. The ST-38 has a 10-station turret, a 350 mm (13-25/32 in) turning length and weighs 6,250 kg. The SX-38 has both a gang post with a B-axis unit and a 10-station turret, with a 320 mm (13-19/32 in) standard headstock stroke.
According to secondary market equipment benchmarks for November 2026, the Star Micronics SX-38 Type A/B is estimated between $39,000 and $78,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $605 / month.
The table covers both types in one set of figures and does not say which rows change between them. Ask the dealer for the type-by-type specification before ordering, in particular for the tool counts on the gang post, B-axis unit and back unit.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.