The Takisawa TS-3000 is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. a top spindle speed of 5,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Takisawa TS-3000 turning centre: 8 in chuck, A2-6 spindle nose, 67 mm bar capacity, 15 kW at 5,000 rpm, 6,000 rpm live tools, YS or Y version.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Takisawa (International) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 5,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | -3,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Spindle Nose | A2-6 (main spindle) |
| Versions | TS-3000YS (right spindle) and TS-3000Y (NC servo tailstock) |
| Chuck Size | 8 + 6 in (203 + 152 mm) (TS-3000YS); 8 in (203 mm) (TS-3000Y) |
| Turret Stations | 12 stations standard; 10, 15 or 20 stations optional (all-holder turret) |
| Max Turning Diameter | 370 mm (14.6 in) with 12- / 10-station turret; 315 mm (12.4 in) with 15-station; 292 mm (11.5 in) with 20-station |
| Max Turning Length | 550 / 535 / 545 mm (21.7 / 21.1 / 21.5 in) (12- or 10- / 15- / 20-station turret) |
| Bar Capacity | 67 mm (2.6 in) (depends on chuck and cylinder) |
| Max Spindle Speed | 5,000 rpm left spindle |
| Sub Spindle | Yes on TS-3000YS, right spindle 6,000 rpm, 11 / 7.5 kW (14.8 / 10.1 hp) |
| Spindle Motor Power | 15 / 11 kW (20.1 / 14.8 hp) left spindle, 30-min / continuous |
| Live Tool Speed | 6,000 rpm |
| Live Tool Power | 7.5 / 3.7 kW (10.1 / 5.0 hp), S3 25% / continuous |
| Rapid Traverse | X 30 / Z 30 / Y 10 / A 30 m/min (1,181 / 1,181 / 394 / 1,181 in/min) (TS-3000YS; A 13 m/min on TS-3000Y) |
| Machine Height | 2,300 mm (90.6 in) |
| Machine Dimensions | TS-3000YS: 2,800 × 2,140 mm (110.2 × 84.3 in); TS-3000Y: 2,800 × 2,070 mm (110.2 × 81.5 in) (without oil pan and chip conveyor) |
| Machine Weight | TS-3000YS: 6,200 kg (13,668 lb); TS-3000Y: 6,000 kg (13,228 lb) |
According to secondary market equipment benchmarks for November 2026, the Takisawa TS-3000 is estimated between $47,000 and $83,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $729 / month.
An 8 in (203 mm) chuck on the left spindle and a 6 in (152 mm) chuck on the right. The left spindle has an A2-6 nose, runs to 5,000 rpm and is rated 15 / 11 kW (20.1 / 14.8 hp). The right spindle runs to 6,000 rpm and is rated 11 / 7.5 kW (14.8 / 10.1 hp). The TS-3000Y has the 8 in chuck only, with an NC servo tailstock in place of the right spindle.
With the standard 12-station turret or the optional 10-station turret: 370 mm (14.6 in) of turning diameter and 550 mm (21.7 in) of turning length. With the 15-station turret: 315 mm (12.4 in) and 535 mm (21.1 in). With the 20-station turret: 292 mm (11.5 in) and 545 mm (21.5 in). All are all-holder turrets.
67 mm (2.6 in), with the table's usual note that it depends on the chuck and cylinder. That sits between the TS-2000 at 51 mm (2.0 in) and the TS-4000 at 82 mm (3.2 in). The left spindle's 5,000 rpm top speed is likewise between the two, at 6,000 rpm for the TS-2000 and 4,200 rpm for the TS-4000.
The TS-3000Y, with its NC servo tailstock, suits shaft-type parts that need end support along the 550 mm (21.7 in) turning length. The TS-3000YS suits parts that must be finished on the back face, since the right spindle can take over the part. The Y version is 6,000 kg (13,228 lb) and 2,800 × 2,070 mm (110.2 × 81.5 in); the YS is 6,200 kg (13,668 lb) and 2,800 × 2,140 mm (110.2 × 84.3 in).
On the TS-3000YS the table lists X 30 / Z 30 / Y 10 / A 30 m/min (1,181 / 1,181 / 394 / 1,181 in/min). On the TS-3000Y the A axis is listed at 13 m/min. The Y axis is the slow one in both cases, so programs with a lot of Y positioning will not see the 30 m/min figure.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.