The Takisawa TS-3000 is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. a top spindle speed of 5,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Takisawa TS-3000 turning centre: 8 in chuck, A2-6 spindle nose, 67 mm bar capacity, 15 kW at 5,000 rpm, 6,000 rpm live tools, YS or Y version.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Takisawa (International) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 5,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | -3,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Spindle Nose | A2-6 (main spindle) |
| Versions | TS-3000YS (right spindle) and TS-3000Y (NC servo tailstock) |
| Chuck Size | 8 + 6 in (203 + 152 mm) (TS-3000YS); 8 in (203 mm) (TS-3000Y) |
| Turret Stations | 12 stations standard; 10, 15 or 20 stations optional (all-holder turret) |
| Max Turning Diameter | 370 mm (14.6 in) with 12- / 10-station turret; 315 mm (12.4 in) with 15-station; 292 mm (11.5 in) with 20-station |
| Max Turning Length | 550 / 535 / 545 mm (21.7 / 21.1 / 21.5 in) (12- or 10- / 15- / 20-station turret) |
| Bar Capacity | 67 mm (2.6 in) (depends on chuck and cylinder) |
| Max Spindle Speed | 5,000 rpm left spindle |
| Sub Spindle | Yes on TS-3000YS, right spindle 6,000 rpm, 11 / 7.5 kW (14.8 / 10.1 hp) |
| Spindle Motor Power | 15 / 11 kW (20.1 / 14.8 hp) left spindle, 30-min / continuous |
| Live Tool Speed | 6,000 rpm |
| Live Tool Power | 7.5 / 3.7 kW (10.1 / 5.0 hp), S3 25% / continuous |
| Rapid Traverse | X 30 / Z 30 / Y 10 / A 30 m/min (1,181 / 1,181 / 394 / 1,181 in/min) (TS-3000YS; A 13 m/min on TS-3000Y) |
| Machine Height | 2,300 mm (90.6 in) |
| Machine Dimensions | TS-3000YS: 2,800 × 2,140 mm (110.2 × 84.3 in); TS-3000Y: 2,800 × 2,070 mm (110.2 × 81.5 in) (without oil pan and chip conveyor) |
| Machine Weight | TS-3000YS: 6,200 kg (13,668 lb); TS-3000Y: 6,000 kg (13,228 lb) |
The price estimate for the Takisawa TS-3000 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/takisawa-ts-3000#price; the request is passed to Takisawa or an authorised dealer.
An 8 in (203 mm) chuck on the left spindle and a 6 in (152 mm) chuck on the right. The left spindle has an A2-6 nose, runs to 5,000 rpm and is rated 15 / 11 kW (20.1 / 14.8 hp). The right spindle runs to 6,000 rpm and is rated 11 / 7.5 kW (14.8 / 10.1 hp). The TS-3000Y has the 8 in chuck only, with an NC servo tailstock in place of the right spindle.
With the standard 12-station turret or the optional 10-station turret: 370 mm (14.6 in) of turning diameter and 550 mm (21.7 in) of turning length. With the 15-station turret: 315 mm (12.4 in) and 535 mm (21.1 in). With the 20-station turret: 292 mm (11.5 in) and 545 mm (21.5 in). All are all-holder turrets.
67 mm (2.6 in), with the table's usual note that it depends on the chuck and cylinder. That sits between the TS-2000 at 51 mm (2.0 in) and the TS-4000 at 82 mm (3.2 in). The left spindle's 5,000 rpm top speed is likewise between the two, at 6,000 rpm for the TS-2000 and 4,200 rpm for the TS-4000.
The TS-3000Y, with its NC servo tailstock, suits shaft-type parts that need end support along the 550 mm (21.7 in) turning length. The TS-3000YS suits parts that must be finished on the back face, since the right spindle can take over the part. The Y version is 6,000 kg (13,228 lb) and 2,800 × 2,070 mm (110.2 × 81.5 in); the YS is 6,200 kg (13,668 lb) and 2,800 × 2,140 mm (110.2 × 84.3 in).
On the TS-3000YS the table lists X 30 / Z 30 / Y 10 / A 30 m/min (1,181 / 1,181 / 394 / 1,181 in/min). On the TS-3000Y the A axis is listed at 13 m/min. The Y axis is the slow one in both cases, so programs with a lot of Y positioning will not see the 30 m/min figure.
