The Thermal Dynamics Victor Thermal Dynamics PAK 200i CNC Plasma is an industrial-grade Fiber Laser Cutting Machines powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Victor Thermal Dynamics PAK 200i: 35 A to 200 A plasma system, 100% duty at 200 A, 70 mm (2 3/4 in.) max cut, 222 kg (490 lbs).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Thermal Dynamics (International) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 222 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Input Voltage | 380-415 VAC, 3 Φ, 50/60 Hz (APC/UAE); 480 VAC, 3Φ, 50/60 Hz (NAM); 400 VAC, 3 Φ, 50/60 Hz (EU) |
| Duty Cycle | 200 A @ 100 % |
| Output Current | 35 A - 200 A |
| Max Cut Thickness | 70 mm (2 3/4 in.) |
| Cut Speed | 254 mm/min (10 ipm) on 50 mm (2 in.) Carbon Steel |
| Gouging Removal Rate | 11.3 kg (25 lbs) of Carbon Steel per hour |
| Plasma Gas | Air, ArH2 |
| Secondary Gas | Air, N2 |
| Footprint | 1219 x 698 x 1031 mm (48 x 27.5 x 40.6 in.) |
| Machine Weight | 222 kg (490 lbs) |
Our best estimate for the Victor Thermal Dynamics PAK 200i CNC Plasma is $8,000 – $15,000. This is an estimate for a cnc plasma cutting in this class, not a quote from Thermal Dynamics; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/victor-thermal-dynamics-pak-200i-plasma#price; the request is passed to Thermal Dynamics or an authorised dealer.
Thermal Dynamics lists a maximum cut thickness of 70 mm (2 3/4 in.). The only cut speed in the table is 254 mm/min (10 ipm) on 50 mm (2 in.) Carbon Steel, so that row is the better guide to production work.
100% at 200 A. The output range is 35 A to 200 A, so the duty cycle rating applies at the top of the range and the system can hold its maximum current without scheduled rest periods.
The plasma gas row lists Air and ArH2, and the secondary gas row lists Air and N2. The table does not say which combination goes with which material, so take that from the cut charts for the torch in use.
It depends on the region the unit was built for: 380-415 VAC for APC/UAE, 480 VAC for NAM and 400 VAC for EU. All three are three-phase at 50/60 Hz. No single-phase input is listed.
The footprint is 1219 x 698 x 1031 mm (48 x 27.5 x 40.6 in.) and the weight is 222 kg (490 lbs). Plan a fixed position near the cutting table and lifting equipment for installation.
