The Tsugami B0208W is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B0208W 20 mm (0.79 in) Swiss-type lathe: 25 tools, eight listed axes with X3 and Y3, 2.2/3.7 kW main spindle to 10,000 rpm, 2,150 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 2.2 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 25 Tool Stations |
| Approx. Machine Weight | 2,150 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Machining Diameter | 20 mm (0.79 in) |
| Max Spindle Speed | 10,000 rpm (rated 8,000 rpm) |
| Sub Spindle Speed | 12,000 rpm (rated 8,000 rpm) |
| Tool Capacity | 25 (standard) |
| Rapid Traverse | 32 m/min (Z1, X2, Z2), 24 m/min (Y1, Y3), 15 m/min (Y2), 12 m/min (X1, X3) |
| Spindle Motor Power | 2.2/3.7 kW |
| Sub Spindle Power | 1.5/2.2 kW |
| Footprint | 1,740 × 1,215 × 1,700 mm (68.5 × 47.8 × 66.9 in) |
| Machine Weight | 2,150 kg (4,740 lb) |
According to secondary market equipment benchmarks for November 2026, the Tsugami B0208W is estimated between $44,500 and $87,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
The B0208W takes 20 mm (0.79 in) bar and has a 2.2/3.7 kW main spindle running to 10,000 rpm, rated 8,000 rpm. The B0128W takes 12 mm (0.47 in) bar and its main spindle runs to 12,000 rpm on a 1.5/2.2 kW motor. Both have 25 tools, the same eight-axis rapid table, the same footprint and a weight of 2,150 kg (4,740 lb).
The table lists 12,000 rpm for the back spindle and 10,000 rpm for the main spindle, both rated 8,000 rpm. The main side handles the full bar and gets the bigger 2.2/3.7 kW motor, against 1.5/2.2 kW on the back spindle. The higher top speed at the back helps small drills and finishing on the cut-off end.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.