The Tsugami B026V-III is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 0i-TF. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B026V-III Swiss-type lathe: 26 mm (1.024 in) bar, sliding headstock with guide bushing, vertical gang tool post, FANUC 0i-TF control.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 0i-TF |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bar Capacity | 26 mm (1.024 in) |
| Guide Bushing | Sliding headstock with guide bushing |
| Tool Post | Vertical gang tool post |
| CNC Control | FANUC 0i-TF |
According to secondary market equipment benchmarks for November 2026, the Tsugami B026V-III is estimated between $44,000 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
The listed table describes the tool post as a vertical gang tool post. Gang tooling selects the next tool with a short axis move, which keeps idle time down on short-cycle parts. Ask for the tooling layout, since this table gives no tool count.
The listed table gives a bar capacity of 26 mm (1.024 in) and a FANUC 0i-TF control. It gives no spindle speeds or motor rating, so get the specification sheet for the exact machine before quoting work on it.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.