The Tsugami B0326 is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 32i-B. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B0326 6-axis Swiss-type lathe: 32 mm (1.26 in) bar, 330 mm stroke, 32/42 tool stations with 15/26 driven, 8,000 RPM spindles, FANUC 32i-B.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 32i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 4,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 32 mm (1.26 in) |
| Number Of Axes | 6 |
| Max Machining Length | 330 mm (12.99 in) |
| Main Spindle Speed | 200 - 8,000 RPM |
| Sub Spindle Speed | 200 - 8,000 RPM |
| Live Tool Speed | 200 - 6,000 RPM |
| Guide Bushing | Yes |
| Chucker Mode | Yes |
| Tool Stations | 32/42 |
| Live Tool Stations | 15 /26 |
| CNC Control | FANUC 32i-B |
| Machine Weight | 4,000 kg (8,818 lb) |
| Footprint | 2,628 × 1,280 × 1,970 mm (103.5 × 50.4 × 77.5 in) |
According to secondary market equipment benchmarks for November 2026, the Tsugami B0326 is estimated between $41,000 and $81,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $636 / month.
330 mm (12.99 in) per chucking. The machine also runs in chucker mode without the guide bushing, but the table does not give a machining length for that mode, so ask Tsugami if short parts in chucker mode are part of the plan.
Tsugami America lists 32/42 tool stations and 15/26 driven stations. The pairs are not explained, so confirm which figure applies to the machine being quoted. The driven tools run at 200 - 6,000 RPM.
The B0386 takes 38 mm (1.5 in) bar against 32 mm (1.26 in), with 320 mm (12.6 in) of stroke and a 200 - 6,000 rpm main spindle. The B0386 weighs 4,850 kg (10,694 lb) against 4,000 kg (8,818 lb). Both list 32/42 tool stations and a FANUC 32i-B control. The B0326 spindles run faster, to 8,000 RPM.
Only by name. The B0326-II Multi-Spindle CNC Automatic is a different kind of machine, listed at approx. 14,000 kg with a 23.5 mm spindle bore. The B0326 is a 6-axis Swiss-type lathe with a main and a sub spindle, weighing 4,000 kg (8,818 lb).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.