The Tsugami B032V-III is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 0i-TF. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B032V-III Swiss-type lathe: 32 mm (1.26 in) bar, vertical gang post, 29 tools, 5 to 11 live, 8,000 RPM spindles, 330 mm stroke.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 0i-TF |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 4,100 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bar Capacity | 32 mm (1.26 in) |
| Number Of Axes | 5 |
| Main Spindle Speed | 8,000 RPM |
| Sub Spindle Speed | 8,000 RPM |
| Live Tool Speed | 6,000 RPM |
| Guide Bushing | Sliding headstock with guide bushing |
| Max Headstock Stroke | 330 mm (12.99 in) |
| Tool Positions | 29 total |
| Live Tool Positions | 5 standard / 11 max |
| Tool Post | Vertical gang tool post |
| CNC Control | FANUC 0i-TF |
| Machine Weight | 4,100 kg (9,039 lb) |
| Footprint | 2,240 x 1,515 x 2,050 mm |
According to secondary market equipment benchmarks for November 2026, the Tsugami B032V-III is estimated between $37,000 and $75,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $574 / month.
The listed table gives 5 standard / 11 max live positions, out of 29 tools in total, with live tools running to 6,000 RPM. Check how many driven operations the part needs and specify the extra positions at order time if the standard 5 are not enough.
The B032V-III has a vertical gang tool post, 29 tools and a guide bushing. The B032-III is listed with a convertible guide bushing and, in its 6-axis form, 32/42 tool positions and 15/26 live positions on a FANUC 32i-B. Both have a 330 mm (12.99 in) stroke and 32 mm (1.26 in) bar capacity.
The listed table describes a sliding headstock with guide bushing and gives no guide-bushless mode. If short parts with low remnant are a large share of the work, ask whether a conversion is available before ordering, or look at a convertible machine.
The table lists 4,100 kg (9,039 lb) and a footprint of 2,240 x 1,515 x 2,050 mm. Neither figure has been checked against Tsugami, so confirm both with an installation drawing and allow space at the headstock end for the bar feeder.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.