The Tsugami B0385 is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 32i-B. a top spindle speed of 200 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B0385 Swiss-type lathe: Ø38 mm (1.5 in) bar, 7.5/11 kW 200-6,000 rpm main spindle, 200-7,000 rpm back spindle, 250 mm (9.8 in) stroke.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 32i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 200 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 23 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Sub Spindle Speed | 200-7,000 rpm |
| Number Of Axes | 5 |
| Live Tool Speed | 5,000 rpm |
| CNC Control | FANUC 32i-B |
| Headstock Stroke | 250 mm (9.8 in) |
| Max Spindle Speed | 200-6,000 rpm |
| Spindle Motor Power | 7.5/11 kW (10.1/14.7 hp) |
| Tool Capacity | 23/31 |
| Bar Capacity | Ø38 mm (1.5 in) |
| Footprint | 1,345 × 2,520 × 1,970 mm (52.9 × 99.2 × 77.5 in) |
According to secondary market equipment benchmarks for November 2026, the Tsugami B0385 is estimated between $43,500 and $85,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $674 / month.
Up to Ø38 mm (1.5 in), against Ø32 mm (1.3 in) on the BO326 and Ø20 mm (0.8 in) on the B0205. The main spindle runs 200-6,000 rpm on 7.5/11 kW (10.1/14.7 hp), and the headstock stroke is 250 mm (9.8 in).
The BO326 takes Ø32 mm (1.3 in) bar and runs its main spindle to 8,000 rpm on 3.7/5.5 kW (5/7.4 hp), with live tools at 6,000 rpm and 34 tools. The B0385 takes Ø38 mm (1.5 in) bar on 7.5/11 kW (10.1/14.7 hp) at 200-6,000 rpm, with live tools at 5,000 rpm. Choose by bar size and how much power the roughing needs.
The dealer's table gives the tool capacity as 23/31, two figures that usually mean a standard and a maximum layout. The live-tool row is garbled. Ask for the tooling layout drawing of the exact configuration being quoted before planning a job around a given number of driven tools.
It runs 200-7,000 rpm, a little faster than the 200-6,000 rpm main spindle. That suits finishing the cut-off end, where diameters are often smaller than the bar. The table gives no back spindle power rating, so ask for it if heavy back-end cuts are planned.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.