The Tsugami B038V-III is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B038V-III Swiss-type lathe: 38 mm (1.5 in) bar, sliding headstock with guide bushing, vertical gang tool post and a FANUC control.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bar Capacity | 38 mm (1.5 in) |
| Guide Bushing | Sliding headstock with guide bushing |
| Tool Post | Vertical gang tool post |
| CNC Control | FANUC |
According to secondary market equipment benchmarks for November 2026, the Tsugami B038V-III is estimated between $39,500 and $79,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $612 / month.
The listed table gives a 38 mm (1.5 in) bar capacity, a sliding headstock with guide bushing, a vertical gang tool post and a FANUC control. It gives no spindle speed or axis count. Ask Tsugami for the full sheet before comparing it with other machines.
Only loosely, because the B038V-III table is thin. The B038M is listed at 7,000 rpm (rated 5,000 rpm) on 3.7/5.5 kW with 40 tools and 7,100 kg (15,653 lb). The B038V-III's spindle speed, tool count and motor are not given, so the two cannot yet be compared on capacity.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.