The Tsugami B073C is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 0i-TF. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B073C guide-bushless chucker: 7 mm (0.275 in) bar, 15,000 RPM main spindle, 3 axes, up to 21 tool positions, FANUC 0i-TF.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 0i-TF |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bar Capacity | 7 mm (0.275 in) |
| Main Spindle Speed | 15,000 RPM |
| Axes | 3 |
| Spindle Motor | 1.1/1.5 kW (2 HP) |
| Tool Positions | Up to 21 |
| Rapid Traverse Rate | 32 m/min |
| Guide Bushing | Dedicated chucker (guide-bushless) |
| CNC Control | FANUC 0i-TF |
According to secondary market equipment benchmarks for November 2026, the Tsugami B073C is estimated between $43,000 and $84,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $667 / month.
No. The listed figures describe it as a dedicated chucker (guide-bushless). The bar is held in the collet without a bushing in front, which suits short parts and reduces remnant. For long slender parts that need support close to the tool, a guide-bushing machine is the safer choice.
Both are listed with a 15,000 RPM main spindle on 1.1/1.5 kW. The B073-VR has a rated speed of 12,000 rpm, carries 13 tools as standard and weighs 1,350 kg (2,976 lb). The B073C is listed with up to 21 tool positions, but its table has not been checked against Tsugami and gives no weight.
A FANUC 0i-TF control and a rapid traverse rate of 32 m/min. The table gives one rapid figure rather than a rate per axis, so ask for per-axis rates if a cycle time estimate depends on them.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.