The Tsugami BW329Z is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 31i-B. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami BW329Z: nine-axis Swiss-type lathe for 32 mm (1.26 in) bar, 330 mm (12.99 in) per chucking, chucker mode, 200 - 8,000 rpm, FANUC 31i-B.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 31i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 32 mm (1.26 in) |
| Number Of Axes | 9 |
| Guide Bushing | Yes |
| Chucker Mode | Yes |
| Max Machining Length | 330 mm (12.99 in) with guide bushing; 70 mm (2.76 in) without |
| Tool Stations | 30/38 |
| Live Tool Stations | 11/26 |
| CNC Control | FANUC 31i-B |
| Main Spindle Speed | 200 - 8,000 rpm |
| Sub Spindle Speed | 200 - 8,000 rpm |
| Main Spindle Power | 3.7 / 5.5 kW (5 / 7.4 hp) |
| Machine Weight | 5,200 kg (11,460 lb) |
| Footprint | 2,655 × 1,640 × 2,000 mm (104.5 × 64.5 × 79 in) |
According to secondary market equipment benchmarks for November 2026, the Tsugami BW329Z is estimated between $40,500 and $81,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $628 / month.
330 mm (12.99 in) per chucking with the guide bushing in place. Without it, in chucker mode, the limit is 70 mm (2.76 in). Which mode a job runs in therefore follows from the part length as much as from its shape.
Tsugami America lists 30/38 tool stations and 11/26 live tool stations without explaining the pairs. They most likely describe a standard and a larger tooling layout, so confirm which one a machine has before planning a job around it.
Both the main and the sub spindle run from 200 to 8,000 rpm. The main spindle is rated 3.7 / 5.5 kW (5 / 7.4 hp). The table does not give a power figure for the sub spindle.
According to secondary market equipment benchmarks for November 2026, the Tsugami BW329Z is estimated between $40,500 and $81,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $628 / month.
A FANUC 31i-B. That is the control listed by Tsugami America for this nine-axis machine; options and software are not listed in the table, so confirm them with the quotation.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.