The Tsugami BW389Z is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami BW389Z Swiss-type lathe: 38 mm (1.50 in) bar capacity, nine axes (X1-Z3), guide bushing convertible to guide-bushless running.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bar Capacity | 38 mm (1.50 in) |
| Axes | 9 axes (X1, Y1, Z1, X2, Y2, Z2, X3, Y3, Z3) |
| Guide Bushing | Yes (convertible to guide-bushless) |
According to secondary market equipment benchmarks for November 2026, the Tsugami BW389Z is estimated between $44,500 and $87,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
The listed bar capacity is 38 mm (1.50 in), on nine axes: X1, Y1, Z1, X2, Y2, Z2, X3, Y3 and Z3. Confirm the figure on the machine's own specification sheet before ordering tooling or a bar feeder.
The listed table says the guide bushing is convertible to guide-bushless running. The bushing supports long, slender parts close to the tool; running without it suits short parts and leaves less remnant on each bar. No machining length is given for either mode.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.