The Tsugami C220 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami C220 loader lathe: 4 in chuck, 260 mm swing, 220 mm X and Z travel, 12,000 rpm 2.2/3.7 kW spindle, 2,200 kg with loader and pallets.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 2.2 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Swing | 260 mm (10.2 in) |
| X-Axis Travel | 220 mm (8.66 in) |
| Z-Axis Travel | 220 mm (8.66 in) |
| Chuck Size | 4 in |
| Max Spindle Speed | 12,000 rpm (rated 10,000 rpm) |
| Rapid Traverse | 15 m/min |
| Least Input Increment | 0.01 µm (X axis in diameter) |
| Spindle Motor Power | 2.2/3.7 kW |
| Footprint | 1,500 × 1,461 × 1,590 mm (59.1 × 57.5 × 62.6 in) (2,240 mm with loader) |
| Machine Weight | 2,200 kg (4,850 lb) (including loader and 2 pallets) |
According to secondary market equipment benchmarks for November 2026, the Tsugami C220 is estimated between $45,000 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $698 / month.
The C220 trades speed for envelope and power. Against the C180 it has 220 mm (8.66 in) of Z travel rather than 150 mm (5.91 in), a 260 mm (10.2 in) swing rather than 220 mm (8.66 in), a 2.2/3.7 kW motor rather than 1.5/2.2 kW, and a 4 in chuck where the C180 takes 3 in or 4 in. The C180 runs faster, to 15,000 rpm, with 24 m/min rapids against 15 m/min, and has 300 mm (11.8 in) of X travel against 220 mm (8.66 in).
Its weight of 2,200 kg (4,850 lb) is stated including the loader and 2 pallets, and the footprint row gives a 2,240 mm figure with the loader. Confirm with Tsugami which loader and pallet configuration that quotation covers.
The least input increment is 0.01 µm on the X axis in diameter. The C200 and C300-V both state 0.1 µm, so the C220 commands X in steps ten times finer. That is a control resolution, not an accuracy figure; the table gives no accuracy value.
It has a 4 in chuck, a 260 mm (10.2 in) maximum swing and 220 mm (8.66 in) of travel on both X and Z. No bar capacity is listed. For blanks that need a bigger chuck, the C300-V carries a 6 in chuck with 300 mm (11.8 in) of X and Z travel.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.