The Tsugami C300-V is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami C300-V precision lathe: 6 in chuck, 38 mm bar, 300 mm X and Z travel, 260 mm swing, 5.5/7.5 kW spindle to 6,000 rpm, 1,900 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 5.5 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 1,900 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bar Capacity | 38 mm (1.50 in) |
| Max Swing | 260 mm (10.2 in) |
| X-Axis Travel | 300 mm (11.8 in) |
| Z-Axis Travel | 300 mm (11.8 in) |
| Chuck Size | 6 in |
| Max Spindle Speed | 6,000 rpm (rated 5,000 rpm) |
| Rapid Traverse | 24 m/min |
| Least Input Increment | 0.1 µm (X axis in diameter) |
| Spindle Motor Power | 5.5/7.5 kW |
| Footprint | 1,522 × 1,535 × 1,600 mm (59.9 × 60.4 × 63.0 in) |
| Machine Weight | 1,900 kg (4,189 lb) |
According to secondary market equipment benchmarks for November 2026, the Tsugami C300-V is estimated between $38,500 and $78,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $597 / month.
The C300-V is bigger in every envelope figure than the C200: a 6 in chuck against 4 in, 38 mm (1.50 in) bar against 32 mm (1.26 in), 300 mm (11.8 in) of X and Z against 200 mm (7.87 in) and a 260 mm (10.2 in) swing against 250 mm (9.84 in). Its motor is 5.5/7.5 kW where the C200 has 3.7/7.5 kW, but the C200 is quicker, with 7,000 rpm against 6,000 rpm and 32 m/min rapids against 24 m/min.
The maximum swing is 260 mm (10.2 in), the chuck is 6 in and both X and Z travel are 300 mm (11.8 in). Bar stock up to 38 mm (1.50 in) can be used. Check the real machining diameter for your tool layout with Tsugami, as the table gives swing rather than a machining diameter.
Its spindle reaches 6,000 rpm with a rated speed of 5,000 rpm. For small diameters the C220 at 12,000 rpm or the C180 at 15,000 rpm reach a useful surface speed far sooner. The C300-V is the choice when part size and chuck size matter more than top speed.
According to secondary market equipment benchmarks for November 2026, the Tsugami C300-V is estimated between $38,500 and $78,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $597 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.