The Tsugami E0165 is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc 0i-F. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami E0165 Swiss-type lathe, listed figures: 16 mm bar, 12,000 RPM main and 10,000 RPM sub spindle, up to 18 tools on five axes.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc 0i-F |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 1,400 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 16 mm (0.630 in) |
| Main Spindle Speed | 12,000 RPM |
| Sub Spindle Speed | 10,000 RPM |
| Main Spindle Power | 1.5 kW (2 hp) |
| Number Of Axes | 5 axes |
| Tool Stations | Up to 18 tools |
| Guide Bushing | Standard (removable for non-guide bushing mode) |
| Travel X1 | 20 mm (0.79 in) |
| Travel Z1 | 160 mm (6.30 in) |
| Travel X2 | 20 mm (0.79 in) |
| Travel Z2 | 70 mm (2.76 in) |
| Rapid Traverse | 28 m/min (1,102 ipm) |
| Positioning Accuracy | ±0.005 mm |
| Repeatability | ±0.003 mm |
| CNC Control | Fanuc 0i-F |
| Machine Weight | 1,400 kg (3,086 lb) |
According to secondary market equipment benchmarks for November 2026, the Tsugami E0165 is estimated between $36,000 and $74,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $558 / month.
No. The E0165 does not appear on Tsugami's current product pages, so the table on this page could not be checked against the maker. Use the listed figures as a guide only and ask Tsugami or a dealer for the current model and its published table.
The listed figures give 16 mm (0.630 in) bar capacity, a 12,000 RPM main spindle rated 1.5 kW (2 hp) and a 10,000 RPM sub spindle. The guide bushing is standard and can be removed for non-guide-bushing mode.
The table lists 20 mm (0.79 in) of X1, 160 mm (6.30 in) of Z1, 20 mm (0.79 in) of X2 and 70 mm (2.76 in) of Z2, with 28 m/min (1,102 ipm) rapid traverse. Check these against Tsugami's own documents before planning a part.
Up to 18 tools on five axes, according to the listed figures. The table does not break that down into front, back or driven positions, so ask for the tool layout before planning a part that needs cross drilling or milling.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.