The Tsugami M08JL5L-II is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami M08JL5L-II lathe: 8 in chuck, 65 mm bar, 350 mm turning diameter, 500 mm turning length, 4,000 rpm 9/11 kW spindle, 8-station turret.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 9.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,520 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 350 mm (13.8 in) |
| Bar Capacity | 65 mm (2.56 in) |
| Max Turning Length | 500 mm (19.7 in) |
| Chuck Size | 8 in |
| Max Spindle Speed | 4,000 rpm (rated 3,500 rpm); low-speed type 1,500 rpm (option) |
| Turret Stations | 8 |
| Rapid Traverse | 24 m/min (X), 27 m/min (Z) |
| Spindle Motor Power | 9/11 kW |
| Footprint | 2,376 × 1,635 × 1,700 mm (93.5 × 64.4 × 66.9 in) |
| Machine Weight | 3,520 kg (7,760 lb) |
According to secondary market equipment benchmarks for November 2026, the Tsugami M08JL5L-II is estimated between $40,000 and $80,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $620 / month.
In the envelope and the weight. The M08JL5L-II turns up to 350 mm (13.8 in) in diameter and 500 mm (19.7 in) long; the M08J-II turns 280 mm (11.0 in) and 290 mm (11.4 in). Spindle speed (4,000 rpm, rated 3,500 rpm), the 9/11 kW rating, the 8-station turret and the rapids are the same. The M08JL5L-II weighs 3,520 kg (7,760 lb), the M08J-II 3,300 kg (7,275 lb).
Bar capacity is 65 mm (2.56 in), the same as the M08J-II, M08D-II and M08DY-II, and the chuck is 8 in. Chucked work can be turned up to 350 mm (13.8 in) in diameter, so the machine covers both bar parts and larger blanks.
Yes. The standard spindle runs to 4,000 rpm (rated 3,500 rpm), and Tsugami lists a 1,500 rpm low-speed type as an option. It suits work where large diameters keep surface speed in range at low rpm, and it is the wrong choice if small bar parts make up much of the mix.
Both turn 500 mm (19.7 in) long. The M10J has a 10 in chuck, 400 mm (15.7 in) of turning diameter, 12 turret stations, a 15/18.5 kW spindle and 30 / 33 m/min rapids, and weighs 4,700 kg (10,362 lb). The M08JL5L-II is lighter at 3,520 kg (7,760 lb) and lists a 65 mm (2.56 in) bar capacity, which the M10J table does not state.
According to secondary market equipment benchmarks for November 2026, the Tsugami M08JL5L-II is estimated between $40,000 and $80,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $620 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.