The Tsugami M08SY-II is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 4,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami M08SY-II: sub-spindle and Y-axis CNC lathe, 8 in main chuck, 65 mm bar, 380 mm length, 12 stations, Y at 12 m/min, 5,600 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,500 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,600 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 280 mm (11.0 in) |
| Bar Capacity | 65 mm (2.56 in) |
| Max Turning Length | 380 mm (15.0 in) |
| Chuck Size | 8 in |
| Sub Spindle Chuck Size | 6 in |
| Max Spindle Speed | 4,500 rpm (rated 4,000 rpm) |
| Sub Spindle Speed | 4,500 rpm (rated 4,000 rpm) |
| Turret Stations | 12 |
| Rapid Traverse | 24 m/min (X), 27 m/min (Z), 12 m/min (Y), 30 m/min (A) |
| Spindle Motor Power | 7.5/11 kW |
| Sub Spindle Power | 5.5/7.5 kW |
| Footprint | 2,474 × 2,050 × 1,930 mm (97.4 × 80.7 × 76.0 in) |
| Machine Weight | 5,600 kg (12,346 lb) |
According to secondary market equipment benchmarks for November 2026, the Tsugami M08SY-II is estimated between $43,000 and $84,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $667 / month.
A sub-spindle with a 6 in chuck, running to 4,500 rpm (rated 4,000 rpm) on 5.5/7.5 kW and travelling on an A axis at 30 m/min. The M08DY-II has the same Y axis and main spindle, finishes the back of the part in a second chucking, and weighs 5,200 kg (11,464 lb) against 5,600 kg (12,346 lb).
According to secondary market equipment benchmarks for November 2026, the Tsugami M08SY-II is estimated between $43,000 and $84,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $667 / month.
It has a Y axis, listed at 12 m/min, which is the axis off-centre milling and drilling need. The table does not give driven-tool speed or power, or the Y stroke, so confirm both before quoting milled features.
5,600 kg (12,346 lb), on a listed footprint of 2,474 × 2,050 × 1,930 mm (97.4 × 80.7 × 76.0 in). Check floor loading, ceiling height and the delivery route against those figures.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.