The Tsugami NH4C is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Mitsubishi M80. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami NH4C horizontal machining center (listed figures): 400 x 400 mm pallets, 560 mm travels, 15,000 RPM 18.5 kW spindle, 40 tools, 2-pallet APC.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Mitsubishi M80 |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 8,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Pallet Size | 400 mm x 400 mm |
| Main Spindle Speed | 15,000 RPM |
| Main Spindle Power | 18.5 kW (25 hp) |
| Main Spindle Torque | 95 Nm (70 ft-lb) |
| Number Of Axes | 4 axes (X, Y, Z, B-axis rotary table) |
| B Axis Resolution | 0.001° |
| Tool Magazine Capacity | 40 tools (60 tools optional) |
| Tool Change Time | 2.5 seconds (chip-to-chip) |
| X-Axis Travel | 560 mm (22.0 in) |
| Y-Axis Travel | 560 mm (22.0 in) |
| Z-Axis Travel | 560 mm (22.0 in) |
| Rapid Traverse | 50 m/min (1,969 ipm) |
| Positioning Accuracy | ±0.003 mm |
| Repeatability | ±0.002 mm |
| Pallet Changer | 2-pallet APC standard |
| CNC Control | Mitsubishi M80 |
| Machine Weight | 8,500 kg (18,739 lb) |
According to secondary market equipment benchmarks for November 2026, the Tsugami NH4C is estimated between $99,000 and $201,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,535 / month.
It does not appear on Tsugami's current product pages, and its spec table could not be checked against the maker. The listed figures (560 mm travels, 400 mm x 400 mm pallets, 15,000 RPM, Mitsubishi M80 control) should be confirmed on the machine or its documentation before purchase.
Both list 560 mm (22 in) of X. The NH4C is listed with 560 mm of Y and Z against 350 mm and 500 mm on the FMA5-V, a 400 mm x 400 mm pallet against 450 x 450 mm, and an 18.5 kW (25 hp) spindle against 5.5 / 7.5 kW. Only the FMA5-V figures are checked against Tsugami America.
The listed table names a Mitsubishi M80. Because the table could not be checked against Tsugami, confirm the control and its software options on the machine itself, and check that your CAM post-processor supports it before buying.
The listed chip-to-chip time is 2.5 seconds and rapids are 50 m/min (1,969 ipm). The magazine is listed with 40 tools, or 60 tools as an option, and the 2-pallet APC lets the next part be loaded while one is machined.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.