The Tsugami P054 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 20,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami P054 Swiss-type lathe: 5 mm (0.20 in) machining diameter, 20,000 rpm main and sub spindles, 14 tools standard, 0.75/1.1 kW each.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 20,000 RPM |
| Spindle Motor Rating | 0.8 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 14 Tool Stations |
| Approx. Machine Weight | 1,050 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Machining Diameter | 5 mm (0.20 in) |
| Max Spindle Speed | 20,000 rpm (rated 15,000 rpm) |
| Sub Spindle Speed | 20,000 rpm (rated 15,000 rpm) |
| Tool Capacity | 14 (standard) |
| Rapid Traverse | 20 m/min |
| Spindle Motor Power | 0.75/1.1 kW |
| Sub Spindle Power | 0.75/1.1 kW |
| Footprint | 1,770 × 820 × 1,600 mm (69.7 × 32.3 × 63.0 in) |
| Machine Weight | 1,050 kg (2,315 lb) |
According to secondary market equipment benchmarks for November 2026, the Tsugami P054 is estimated between $47,500 and $96,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $736 / month.
In tool capacity and weight. The P054 carries 14 tools as standard and weighs 1,050 kg (2,315 lb), while the P053 carries 11 tools and weighs 1,000 kg (2,205 lb). Spindle speed, the 0.75/1.1 kW rating and the 20 m/min rapid are the same on both.
5 mm (0.20 in) is the maximum machining diameter in Tsugami's table. That sets the class of part the machine is built for: small turned components, where a spindle reaching 20,000 rpm (rated 15,000 rpm) matters more than motor power.
On Tsugami's figures they share 14 standard tools, 0.75/1.1 kW spindles, 20 m/min rapids and a weight of 1,050 kg (2,315 lb). The P014 runs its main spindle to 25,000 rpm (rated 15,000 rpm) against 20,000 rpm on the P054, so for the very smallest diameters, where reaching cutting speed is hard, the P014 has the edge.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.