The Tsugami S205A-II is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami S205A-II Swiss-type lathe: 20 mm (0.79 in) machining diameter, 27 tools standard, 10,000 rpm main and sub spindles, 35 m/min rapids.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 2.2 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 27 Tool Stations |
| Approx. Machine Weight | 3,750 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Machining Diameter | 20 mm (0.79 in) |
| Max Spindle Speed | 10,000 rpm (rated 8,000 rpm) |
| Sub Spindle Speed | 10,000 rpm (rated 8,000 rpm) |
| Tool Capacity | 27 (standard) |
| Rapid Traverse | 35 m/min (Z1, X2, Z2), 24 m/min (X1, Y1, Y2) |
| Spindle Motor Power | 2.2/3.7 kW |
| Sub Spindle Power | 2.2/3.7 kW |
| Footprint | 2,325 × 1,270 × 1,970 mm (91.5 × 50.0 × 77.6 in) |
| Machine Weight | 3,750 kg (8,267 lb) |
According to secondary market equipment benchmarks for November 2026, the Tsugami S205A-II is estimated between $38,500 and $78,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $597 / month.
Tsugami's table separates them by one row: the S205A-II carries 27 tools as standard and the S206A-II 31. Machining diameter of 20 mm (0.79 in), 10,000 rpm (rated 8,000 rpm) on both spindles, 2.2/3.7 kW, the rapids and the 3,750 kg (8,267 lb) weight are listed the same.
On paper, yes. Tsugami lists the sub spindle at 10,000 rpm (rated 8,000 rpm) and 2.2/3.7 kW, the same as the main spindle. Drilled ends, threads and chamfers on the back of a part can therefore be cut at the same speeds and power as front-end work.
35 m/min on Z1, X2 and Z2, and 24 m/min on X1, Y1 and Y2. The long Z moves are the fast ones, which is where a Swiss-type spends most of its positioning time.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.