The Tsugami S257 is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc 32i-B. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami S257 Swiss-type lathe: 25 mm (0.984 in) bar, seven axes with a Y axis, up to 28 tools, 10,000 RPM main and sub spindles, Fanuc 32i-B.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc 32i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2,300 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 25 mm (0.984 in) |
| Main Spindle Speed | 10,000 RPM |
| Sub Spindle Speed | 10,000 RPM |
| Main Spindle Power | 3.7 kW (5 hp) |
| Number Of Axes | 7 axes (including Y-axis) |
| Tool Stations | Up to 28 tools |
| Guide Bushing | Standard (removable for non-guide bushing mode) |
| Travel X1 | 28 mm (1.10 in) |
| Travel Z1 | 200 mm (7.87 in) |
| Travel X2 | 28 mm (1.10 in) |
| Travel Z2 | 95 mm (3.74 in) |
| Rapid Traverse | 32 m/min (1,260 ipm) |
| Positioning Accuracy | ±0.003 mm |
| Repeatability | ±0.002 mm |
| CNC Control | Fanuc 32i-B |
| Machine Weight | 2,300 kg (5,071 lb) |
According to secondary market equipment benchmarks for November 2026, the Tsugami S257 is estimated between $45,000 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $698 / month.
25 mm (0.984 in) is the listed maximum bar capacity. That puts the S257 a size above the 20 mm (0.79 in) S205-II, and makes it a candidate for parts just too large for a 20 mm machine.
Z1 travel is listed as 200 mm (7.87 in), with the guide bushing standard. Longer parts need re-chucking during the cycle. On the back side, Z2 travel is 95 mm (3.74 in), which limits how far back-end tools can reach along the part.
Seven axes are listed, including a Y axis, and up to 28 tools. The table does not say how many of those positions can take live tools or how fast live tools run, so check the tooling layout of the machine in question.
It does not appear on Tsugami's current product pages. There is no current Tsugami table to compare against, so treat the accuracy, weight and stroke figures shown here as items to confirm on any S257 being offered.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.