The Tsugami SS20 is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 32i-B. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami SS20 Swiss-type lathe: 20 mm (0.79 in) bar, 220 mm per chucking, 24/40 tool stations, 200-10,000 rpm spindles, FANUC 32i-B, six axes.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 32i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,400 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 20 mm (0.79 in) |
| Number Of Axes | 6 |
| Guide Bushing | Yes |
| Chucker Mode | Yes |
| Max Machining Length | 220 mm (8.66 in) with guide bushing; 45 mm (1.77 in) without |
| Tool Stations | 24/40 |
| Live Tool Stations | 10/13 |
| CNC Control | FANUC 32i-B |
| Main Spindle Speed | 200 - 10,000 rpm |
| Sub Spindle Speed | 200 - 10,000 rpm |
| Live Tool Speed | 5,000 rpm |
| Main Spindle Power | 2.2 / 3.7 kW (3 / 5 hp) |
| Machine Weight | 3,400 kg (7,495 lb) |
| Footprint | 2,020 × 1,675 × 2,020 mm (79.5 × 65.9 × 79.5 in) |
According to secondary market equipment benchmarks for November 2026, the Tsugami SS20 is estimated between $43,500 and $85,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $674 / month.
Bar size, machining length and spindle power. The SS20 takes 20 mm (0.79 in) bar, machines 220 mm (8.66 in) per chucking and has a 2.2 / 3.7 kW (3 / 5 hp) main spindle. The SS26 takes 26 mm (1.02 in), machines 270 mm (10.62 in) and has 3.7 / 5.5 kW (5 / 7.4 hp). Tool stations, live-tool speed, weight and footprint are listed the same.
220 mm (8.66 in) per chucking with the guide bushing. In chucker mode, with the bushing removed, it is 45 mm (1.77 in). Parts longer than the per-chucking figure are machined in several chuckings, which adds cycle time and needs care over concentricity.
Up to 5,000 rpm, on 10/13 live positions. That is enough for drilling and milling at moderate sizes, but small tools will run below their best cutting speed. If fine milled or drilled features dominate the work, compare with the SS20MH-III-5AX, whose tool spindle is listed at 25,000 rpm.
According to secondary market equipment benchmarks for November 2026, the Tsugami SS20 is estimated between $43,500 and $85,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $674 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.