The Tsugami B032-III is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 0i-TF Plus (5-axis) / FANUC 32i-B (6-axis). a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B032-III Swiss-type lathe: 32 mm (1.26 in) bar, 5-axis or 6-axis, 200-8,000 RPM spindles, 330 mm (12.99 in) stroke, up to 32/42 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 0i-TF Plus (5-axis) / FANUC 32i-B (6-axis) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 4,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bar Capacity | 32 mm (1.26 in) |
| Main Spindle Speed | 200-8,000 RPM |
| Sub Spindle Speed | 200-8,000 RPM |
| Spindle Motor | 3.7/5.5 kW |
| Axes | 5 (B0325B) or 6 (B0326) |
| Live Tool Speed | 6,000 RPM |
| Tool Positions 5 Axis | 31/32 |
| Tool Positions 6 Axis | 32/42 |
| Live Tool Positions 5 Axis | 4/8 |
| Live Tool Positions 6 Axis | 15/26 |
| Headstock Stroke | 330 mm (12.99 in) |
| Rapid Traverse Rate | 35 m/min |
| Guide Bushing | Convertible (Swiss/chucker) |
| CNC Control | FANUC 0i-TF Plus (5-axis) / FANUC 32i-B (6-axis) |
| Machine Weight | 4,000 kg (8,818 lbs) |
| Dimensions | 2,628 x 1,280 x 1,970 mm (103.5 x 50.4 x 77.5 in) |
Our best estimate for the Tsugami B032-III is $320,000 - $480,000. This is an estimate for a swiss-type lathes in this class, not a quote from Tsugami; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/tsugami-b032-iii#price; the request is passed to Tsugami or an authorised dealer.
Tooling and control. The 5-axis B0325B is listed with 31/32 tool positions, 4/8 live positions and a FANUC 0i-TF Plus. The 6-axis B0326 is listed with 32/42 tool positions, 15/26 live positions and a FANUC 32i-B. Spindles, motor and stroke are the same on both.
The headstock stroke is 330 mm (12.99 in), so shafts up to that length can be finished without re-gripping. The guide bushing is convertible, so short parts can also run as a chucker; the table does not give the stroke in chucker mode, so ask for it if that is the main use.
Both take 32 mm (1.26 in) bar with a 330 mm (12.99 in) stroke. The B032V-III uses a vertical gang tool post with 29 tools in total and 5 standard / 11 max live positions, on a FANUC 0i-TF, and is listed at 4,100 kg (9,039 lb). The B032-III offers more tools and live positions in its 6-axis form.
The listed weight is 4,000 kg (8,818 lbs) and the dimensions are 2,628 x 1,280 x 1,970 mm (103.5 x 50.4 x 77.5 in). These figures have not been checked against Tsugami, so confirm them with an installation drawing, and leave room at the headstock end for the bar feeder.