The Victor Taichung Vturn-F26/60 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Victor Taichung Vturn-F26/60: 10 in chuck box-way lathe, A2-8 spindle at 3,500 rpm, Ø75 mm bar, Ø430 x 640 mm turning, 10-tool turret.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Victor Taichung (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,650 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Standard Turning Diameter | Ø350 mm (Ø13.77 in) |
| Max Turning Diameter | Ø430 mm (Ø16.92 in) |
| Max Turning Length | 640 mm (25.19 in) |
| Swing Over Carriage | Ø480 mm (Ø18.89 in) |
| Max Spindle Speed | 3,500 rpm |
| Spindle Nose | A2-8 (10") |
| Bar Capacity | Ø75 mm (Ø2.95 in) |
| Turret Tools | 10 |
| Tool Shank Size | □25 mm |
| Tailstock Quill Taper | M.T. #5 |
| Machine Weight | 5,650 kg (12,456.10 lb) |
According to secondary market equipment benchmarks for November 2026, the Victor Taichung Vturn-F26/60 is estimated between $43,500 and $85,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $674 / month.
Bed length. The Vturn-F26/60 has 640 mm (25.19 in) of turning length and weighs 5,650 kg (12,456.10 lb). The Vturn-F26/110 has 1,130 mm (44.48 in) and weighs 6,250 kg (13,778.87 lb). Spindle, bar capacity, turret and tailstock are the same.
An A2-8 nose with a 10 in chuck, 3,500 rpm maximum speed and Ø75 mm (Ø2.95 in) bar capacity. Victor Taichung describes it as belt driven with a shortened belt to cut noise and heat.
10 tools in the turret, on □25 mm shanks. The smaller Vturn-F20/60 has 12 tools, so the larger model gives up two stations for its bigger tooling.
The option list includes a manual tool presetter, higher pressure coolants, an air conditioner for the electrical cabinet, a part catcher, a bar feeder interface, an auto door and hard jaws. There is no C axis option.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.