The Victor Taichung Vturn-NP16 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Victor Taichung Vturn-NP16 compact lathe: 6 in chuck, 6,000 rpm A2-5 spindle, Ø42 mm bar, 270 mm turning length, 2 Axis and C Axis variants.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Victor Taichung (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Standard Turning Diameter | 2 Axis: Ø185 mm (Ø7.28 in); C Axis: Ø200 mm (Ø7.87 in) |
| Max Turning Diameter | 2 Axis: Ø260 mm (Ø10.23 in); C Axis: Ø200 mm (Ø7.87 in) |
| Max Turning Length | 270 mm (10.62 in) |
| Swing Over Carriage | Ø325 mm (Ø12.79 in) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Nose | A2-5 (6") |
| Bar Capacity | Ø42 mm (Ø1.65 in) |
| Turret Tools | 12 |
| Tool Shank Size | □20 mm |
| Machine Weight | 2 Axis: 3,700 kg (8,157.09 lb); C Axis: 4,070 kg (8,972.80 lb) |
According to secondary market equipment benchmarks for November 2026, the Victor Taichung Vturn-NP16 is estimated between $38,500 and $78,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $597 / month.
Victor Taichung gives a machine width of only 1488 mm. Weight is 3,700 kg (8,157.09 lb) for the 2 Axis machine and 4,070 kg (8,972.80 lb) with the C axis. Z travel is stated as 250 mm.
The maximum turning diameter falls from Ø260 mm (Ø10.23 in) to Ø200 mm (Ø7.87 in), the standard turning diameter becomes Ø200 mm (Ø7.87 in) as well, and the weight rises to 4,070 kg (8,972.80 lb). Spindle, bar capacity and the 12-tool turret stay the same.
The spec table has no tailstock row for this model. A manual tailstock with power quill is on the NP series option list, so ask for it if the work includes shafts that need a centre.
Ø42 mm (Ø1.65 in) through the A2-5 spindle, at speeds up to 6,000 rpm. A bar feeder interface is listed as an option rather than as standard equipment.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.