The Victor Taichung Vturn-NP26 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Victor Taichung Vturn-NP26: 10 in chuck lathe, A2-8 spindle at 3,500 rpm, 75 mm bar, 640 mm turning length, roller guideways, BMT65 turret.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Victor Taichung (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Standard Turning Diameter | 2 Axis: 271 mm (10.66 in); C Axis: 266 mm (10.47 in) |
| Max Turning Diameter | 2 Axis: 450 mm (17.71 in); C Axis: 440 mm (17.32 in) |
| Max Turning Length | 640 mm (25.19 in) |
| Swing Over Carriage | 540 mm (21.25 in) |
| Max Spindle Speed | 3,500 rpm |
| Spindle Nose | A2-8 (10") |
| Bar Capacity | 75 mm (2.95 in) |
| Turret Tools | 2 Axis: 10; C Axis: 12 |
| Tool Shank Size | □25 mm |
| Tailstock Quill Taper | M.T. #5 |
| Machine Weight | 2 Axis: 5,200 kg (11,464.02 lb); C Axis: 5,300 kg (11,684.48 lb) |
According to secondary market equipment benchmarks for November 2026, the Victor Taichung Vturn-NP26 is estimated between $44,000 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
10 tools on the 2 Axis machine and 12 tools on the C Axis machine, both on □25 mm shanks. Victor Taichung describes the turret as a servo BMT65 type.
Maximum turning diameter is 450 mm (17.71 in) for the 2 Axis machine and 440 mm (17.32 in) for the C Axis machine. Maximum turning length is 640 mm (25.19 in) and swing over the carriage is 540 mm (21.25 in).
An A2-8 nose with a 10 in chuck, a top speed of 3,500 rpm and 75 mm (2.95 in) of bar capacity. The tailstock quill opposite it has an M.T. #5 taper.
Victor Taichung describes it as ready for unmanned operations and lists a robot system among the NP series options. Chips can leave at the rear or on the right, which keeps the front of the machine clear for a loader.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.