The Victor Taichung Vturn-S26/110 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Victor Taichung Vturn-S26/110 lathe: 1,130 mm turning length, 10 in chuck, 3,500 rpm A2-8 spindle, Ø75 mm bar, M.T. #5 tailstock.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Victor Taichung (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Standard Turning Diameter | 2 Axis: Ø350 mm (Ø13.77 in); C Axis: Ø285 mm (Ø11.22 in) |
| Max Turning Diameter | 2 Axis: Ø430 mm (Ø16.92 in); C Axis: Ø420 mm (Ø16.53 in) |
| Max Turning Length | 1,130 mm (44.48 in) |
| Swing Over Carriage | Ø480 mm (Ø18.89 in) |
| Max Spindle Speed | 3,500 rpm |
| Spindle Nose | A2-8 (10") |
| Bar Capacity | Ø75 mm (Ø2.95 in) |
| Turret Tools | 2 Axis: 10; C Axis: 12 |
| Tool Shank Size | □25 mm |
| Tailstock Quill Taper | M.T. #5 |
| Machine Weight | 2 Axis: 6,650 kg (14,660.72 lb); C Axis: 6,750 kg (14,881.18 lb) |
According to secondary market equipment benchmarks for November 2026, the Victor Taichung Vturn-S26/110 is estimated between $43,500 and $85,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $674 / month.
1,130 mm (44.48 in), the longest in the S26 size. The Vturn-S26/60 on the same spindle has 640 mm (25.19 in). Maximum turning diameter is Ø430 mm (Ø16.92 in) for the 2 Axis machine.
A programmable tailstock is on the S series standard list, and the table gives an M.T. #5 quill taper for this model. A tailstock centre is listed separately as an option.
6,650 kg (14,660.72 lb) as a 2 Axis machine and 6,750 kg (14,881.18 lb) with the C axis. Check the floor loading and the length needed for the chip conveyor before siting it.
A bar feeder interface and a bar stopper are both on the S series option list. Bar capacity through the A2-8 spindle is Ø75 mm (Ø2.95 in) at speeds up to 3,500 rpm.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.