Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Doosan Machine Tools DNM 4500 vs Dener TMC 850.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Doosan Machine Tools
View Specs Page →
|
Dener
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | International | International |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 8,000 RPM | 10,000 RPM Highest RPM |
| Spindle Motor Rating | 18.5 kW (24.8 HP) More Power | 7.5 kW (10.1 HP) |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | N/A | 850 mm |
| Y-Axis Travel | N/A | 510 mm |
| Z-Axis Travel | N/A | 560 mm |
| Table Surface Dimensions | 1,000 × 450 mm (39 × 18 in) | 1,000 x 500 mm |
| Maximum Table Payload | 600 kg Heaviest Load | 500 kg |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | Standard ATC | Standard ATC |
| Rapid Traverse Rate | High-Speed Rapid Feed | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Standard CNC | Standard CNC |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 5,000 kg | Standard Industrial Weight |
When evaluating Doosan Machine Tools DNM 4500 vs Dener TMC 850, shop managers must weigh spindle kinematics against overall structural rigidity. The Doosan Machine Tools DNM 4500 delivers a competitive edge in heavier stock removal with its 18.5 kW spindle motor. Conversely, the Dener TMC 850 offers high-speed finishing advantages with a top speed of 10,000 RPM. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.