Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Doosan Machine Tools DNM 6700 vs Brother SPEEDIO S700X1N.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Doosan Machine Tools
View Specs Page →
|
Brother
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | International | Japan |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 8,000 RPM | Standard |
| Spindle Motor Rating | 18.5 kW (24.8 HP) More Power | 5.5 kW (7.4 HP) |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | N/A | 700 mm |
| Y-Axis Travel | N/A | 400 mm |
| Z-Axis Travel | N/A | 305 mm |
| Table Surface Dimensions | 1,500 × 670 mm (59 × 26 in) | Standard Worktable |
| Maximum Table Payload | 1,300 kg | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | Standard ATC | Standard ATC |
| Rapid Traverse Rate | High-Speed Rapid Feed | 50 m/min (1,969 ipm) |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Standard CNC | Brother CNC-C00 |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 8,500 kg | Standard Industrial Weight |
When evaluating Doosan Machine Tools DNM 6700 vs Brother SPEEDIO S700X1N, shop managers must weigh spindle kinematics against overall structural rigidity. The Doosan Machine Tools DNM 6700 delivers a competitive edge in heavier stock removal with its 18.5 kW spindle motor. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.