Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Mazak QT-PRIMOS vs Okuma LB3000 EX II.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Mazak
View Specs Page →
|
Okuma
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Lathes & Turning Centers | CNC Lathes & Turning Centers |
| Controlled Axes | 3-Axis Simultaneous | 2-Axis Simultaneous |
| OEM Headquarters | Japan | Japan |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 6,000 RPM Highest RPM | 5,000 RPM |
| Spindle Motor Rating | 11.0 kW (14.8 HP) | 22.0 kW (29.5 HP) More Power |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 130 mm | 260 mm Longest X |
| Y-Axis Travel | N/A | N/A |
| Z-Axis Travel | 230 mm | 560 mm Longest Z |
| Table Surface Dimensions | Standard Worktable | 8" / 10" Chuck |
| Maximum Table Payload | Standard Capacity | 400 kg |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 8 Tools | 12 Tools Largest ATC |
| Rapid Traverse Rate | High-Speed Rapid Feed | 30 m/min |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | MAZATROL SmoothEz / MAZAK FZ | Okuma OSP-P300LA-e |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 2,200 kg | 5,100 kg Heaviest Base |
When evaluating Mazak QT-PRIMOS vs Okuma LB3000 EX II, shop managers must weigh spindle kinematics against overall structural rigidity. The Okuma LB3000 EX II delivers a competitive edge in heavier stock removal with its 22.0 kW spindle motor. Conversely, the Mazak QT-PRIMOS offers high-speed finishing advantages with a top speed of 6,000 RPM. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.