Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Tsugami VA4-II vs DMG MORI CMX 1100 V.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Tsugami
View Specs Page →
|
DMG MORI
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | International | Germany / Japan |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 10,000 RPM | 12,000 RPM Highest RPM |
| Spindle Motor Rating | 11.0 kW (14.8 HP) | 20.0 kW (26.8 HP) More Power |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | N/A | 1,100 mm |
| Y-Axis Travel | N/A | 560 mm |
| Z-Axis Travel | N/A | 510 mm |
| Table Surface Dimensions | 1,000 × 510 mm (39.4 × 20.1 in) | 1400 x 560 mm |
| Maximum Table Payload | 800 kg | 1,000 kg Heaviest Load |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 30 Tools | 30 Tools |
| Rapid Traverse Rate | High-Speed Rapid Feed | 36 m/min |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Standard CNC | CELOS with Siemens 840D / Heidenhain |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 5,000 kg | 5,500 kg Heaviest Base |
When evaluating Tsugami VA4-II vs DMG MORI CMX 1100 V, shop managers must weigh spindle kinematics against overall structural rigidity. The DMG MORI CMX 1100 V delivers a competitive edge in heavier stock removal with its 20.0 kW spindle motor. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.