The Tsugami VA4-II is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami VA4-II VMC: 850 × 510 × 460 mm (33.5 × 20.1 × 18.1 in) travels, No.40 spindle to 10,000 rpm, 11/15/18.5 kW, 30 tools, 800 kg table load.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | 7/24 taper No.40 |
| Table / Platter / Chuck Size | 1,000 × 510 mm (39.4 × 20.1 in) |
| Max Table Load Capacity | 800 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 5,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Spindle Taper | 7/24 taper No.40 |
| Max Spindle Speed | 10,000 rpm (rated 8,000 rpm) |
| Spindle Motor Power | 11/15/18.5 kW |
| Table Size | 1,000 × 510 mm (39.4 × 20.1 in) |
| Max Table Load | 800 kg (1,764 lb) (uniform load) |
| X-Axis Travel | 850 mm (33.5 in) |
| Y-Axis Travel | 510 mm (20.1 in) |
| Z-Axis Travel | 460 mm (18.1 in) |
| Rapid Traverse | 40 m/min (X, Y), 30 m/min (Z) |
| Tool Shank | BBT40 |
| Tool Capacity | 30 |
| Footprint | 2,380 × 2,655 × 2,652 mm (93.7 × 105 × 104 in) |
| Machine Weight | 5,000 kg (11,023 lb) |
According to secondary market equipment benchmarks for November 2026, the Tsugami VA4-II is estimated between $45,500 and $81,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $705 / month.
Tool capacity and envelope. The VA4-II holds 30 tools and has 850 × 510 × 460 mm (33.5 × 20.1 × 18.1 in) of travel on a 1,000 × 510 mm table. The VL4 holds 20 tools and has 1,000 × 510 × 660 mm (39.4 × 20.1 × 26.0 in) of travel on a 1,100 × 510 mm (43.3 × 20.1 in) table. Spindle, table load and rapids are the same on both.
BBT40, on a 7/24 taper No.40 spindle. The magazine holds 30 tools. The published table does not give maximum tool diameter, length or weight, so check those against your largest face mills and boring heads.
800 kg (1,764 lb) of uniform load on the 1,000 × 510 mm (39.4 × 20.1 in) table. Concentrated loads, such as a heavy part on a small fixture, should stay well inside that figure.
10,000 rpm maximum with a rated speed of 8,000 rpm, and a power rating of 11/15/18.5 kW. That suits steel and cast iron with mid-size and large tools. Aluminium work with small end mills would benefit from a faster spindle, such as the 20,000 rpm spindle of the VA3.
According to secondary market equipment benchmarks for November 2026, the Tsugami VA4-II is estimated between $45,500 and $81,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $705 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.