The ANCA CPX is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the ANCA AMC5 G2 High Performance CNC, High Speed SSD, Ethercat, Intel processor, Windows 10. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
ANCA CPX pinch/peel blank grinder: 43 kW (58 HP) roughing and 9.7 kW (13 HP) finishing spindles, 32 mm shanks, 380 mm tool length, AR300 loader.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | ANCA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | ANCA AMC5 G2 High Performance CNC, High Speed SSD, Ethercat, Intel processor, Windows 10 |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 43.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Machine Structure | Rigid 4-axes design for pinch/peel grinding |
| Spindle Motor Power | Roughing spindle peak power 43Kw (58 HP); Finishing Spindle Peak Power 9.7Kw (13HP) |
| Wheel Packs | 2 wheel packs, one for roughing and the other for finishing |
| Tool Shank Diameter | 32 mm (1 1/4”) |
| Max Tool Length | 380 mm (14.1”) |
| Loader Type | AR300 |
| Max Tool Capacity With Loader | Ø20 mm (3/4”) x 200 mm (8”) long |
| Drive System | Linear Motor |
| Footprint | 2477 mm (97.5”) W x 1659 mm (65.3”) D x 2052 mm (80.8”) H |
| CNC Control | ANCA AMC5 G2 High Performance CNC, High Speed SSD, Ethercat, Intel processor, Windows 10 |
According to secondary market equipment benchmarks for November 2026, the ANCA CPX is estimated between $59,500 and $105,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $922 / month.
The CPX is a blank preparation grinder. The table describes it as a rigid 4-axes design for pinch/peel grinding, with 2 wheel packs, one for roughing and the other for finishing. It grinds the round blank that a tool grinder later turns into a finished cutting tool. It is not listed as a fluting machine.
According to secondary market equipment benchmarks for November 2026, the ANCA CPX is estimated between $59,500 and $105,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $922 / month.
The machine takes a tool shank diameter of 32 mm (1 1/4”) and a maximum tool length of 380 mm. With the AR300 loader the listed capacity is Ø20 mm (3/4”) x 200 mm (8”) long. Blanks between those two limits fit the machine but sit outside the loader figure, so ask how they are loaded.
According to secondary market equipment benchmarks for November 2026, the ANCA CPX is estimated between $59,500 and $105,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $922 / month.
The axes are driven by linear motors. The control is the ANCA AMC5 G2 High Performance CNC with a high speed SSD, EtherCAT, an Intel processor and Windows 10. The FX5 and MX7 list the same control, which helps a shop that runs blank preparation and tool grinding side by side.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.